Products

CoatOSil™ T-Cure Silane Oligomer may be useful in the development of coating formulations where reactivity with a mercapto silane is desired. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primers for metals and flooring, and aurospace and automotive refinishing applications.

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

CoatOSil™ DRI waterborne silicone resin can help reduce water uptake and improve UV resistance in organic waterborne coating compositions. Its chemical structure enables CoatOSil™ DRI waterborne silicone resin to overcome the difficulties of combining silicone materials with organic waterborne resins. CoatOSil™ DRI waterborne silicone resin has been shown to improve hydrophobicity and elongation properties when used as a co-binder with acrylic latexes, resulting in more flexible coatings and sealants. CoatOSil™ DRI waterborne silicone resin can also be considered as a sole binder when maximum thermal and UV stability is a priority. When applied alone, CoatOSil™ DRI waterborne silicone resin cures at room temperature to form an elastomeric film.

Enhancing the physical properties of water-borne dispersion polymers, such as polyurethane and acrylic latexes, CoatOSil™ 2287 silane enables the formulation of coatings with good shelf stability, improved wet adhesion and enhanced resistance to water and organic solvents. This non-yellowing additive can be considered as an adhesion promoter or crosslinker.

LIM™ 6045 by Momentive Performance Materials is comprised of Liquid Silicone Rubber. It is commonly used as Molding Resin for a variety of applications. It is available in Liquid form.

Silquest™ A-171 silane offers vinyl and silane functionality and also can be utilized for chain extension of RTV silicones or OH functional polymers. This results in Si-O-Si crosslink sites that are highly resistant to the effects of exposure to moisture, chemicals and UV rays. As a siloxane crosslinker, Silquest™ A-171 silane typically does not generate color and is resistant to acid rain under most conditions. This silane is also useful as a moisture scavenger in moisture cure systems where improved shelf life is desired.

Silopren™ LSR 7090 by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Automotive. It is available in Liquid form.

Silquest™ VX-225 silane is an amino-functional oligosiloxane adhesion promoter that may be considered for use over a broad range of adhesives and sealants applications.

Silopren™ Electro 342-15 FR by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used It is available in Liquid form.

Silopren™ Matrix 70 and 80 two-component liquid silicone rubber for injection molding processes contain polymeric fibers, which help reinforce molded articles while maintaining LSR's excellent processing properties.Key Features and Typical BenefitsVulcanizates consisting of Silopren™ Matrix LSR are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Good rubber-like properties High modulus High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ Matrix LSR is an excellent candidate to consider for use in the following elastomeric articles: Membranes Pressure hoses Exhaust hangers Watchbands Belts.

LIM™ 6040-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6040-D2 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds The combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Silquest™ A-Link 15 silane may be used for use as an endcapper or crosslinker for isocyanate functional prepolymer systems. This product provides improved thermal and UV stability over previous secondary amino silane endcappers. Silquest™ A-Link 15 silane can also be utilized as an adhesion promoter in silicone, hybrid, urethane, and epoxy adhesives and sealants.

Momentive Performance Materials M120XB Methyl Silicone Resin is a binder for heat-resistant, anti-corrosion finishes and for heat-stable, anti-stick finishes, our M120XB methyl silicone resin can help contribute to the design of formulations that are required to perform in unforgiving and demanding environments. Applications from blast furnace gas pipes to vulcanizing molds have demonstrated the robustness and durability of finishes employing M120XB methyl silicone resin.

Silquest™ Y-11699 silanes are secondary aminofunctional bis-silanes. This category of silanes is generally useful to consider for a broad range of applications to promote adhesion in coatings, adhesives and sealants between organic polymers and glass, metal, wood or cast plastic substrates.

Silblock™ F Polysiloxane Emulsion is a waterborne, solvent-free, polysiloxane additive for use in waterborne paint formulations to enhance performance and durability. It is an excellent candidate to consider for use in exterior and interior architectural paints. Paints containing Silblock F emulsion typically demonstrate improved resistance to UV, water, alkali and efflorescence. Additionally, durability of color retention and water resistance can be extended by 50% or more. Silblock F emulsion can be added during paint manufacturing or premixed with the existing binder emulsion.

CoatOSil™ 1770 silane can benefit from better adhesion, improved appearance, and longer retention of functional and esthetic properties. As a cycloaliphatic epoxy silane, CoatOSil™ 1770 silane can deliver crosslinking in latex under room or elevated temperature cure conditions. Through crosslinking, CoatOSil™ 1770 silane can improve the solvent, stain and weather resistance of the final coating.

Silquest™ A-1120, N(beta-aminoethyl) gamma-aminopropyltrimethoxy- silane, and Silquest™ A-2120, N(beta-aminoethyl) gamma aminopropylmethyldimethoxy-silane, are diaminofunctional silanes that may be used over a broad range of applications. They are used to promote the adhesion of amino-reactive resins such as silicone, silylated polyurethane, two-part urethanes and two-part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers or reinforcements.

Silopren™ Electro 242-2 TP 3750 is a two-component liquid silicone rubber for injection molding processes. This silicone rubber is particularly developed for the manufacturing of housing and weather sheds for all kinds of insulatorsKey Features and BenefitsVulcanisates consisting of Silopren™ Electro 242-2 TP 3750 are distinguished by the following properties: outstanding aging behavior and weather resistance fast hydrophobicity transfer and hydrophobicity recovery rapid vulcanisation excellent dielectric behavior over a wide range of temperatures very good tracking and arc resistance very good flowability high stability and flexibility at low temperatures excellent stability to ozone and ultraviolet light not readily combustible, does not melt or drip easy pigmentable with LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ Electro 242-2 TP 3750 is particularly suitable for the following elastomeric articles: suspension and long rod insulators, post line and pin insulators, surge arresters, hollow core insulators, high voltage plugs, cable connectors, fittings and terminals s.o.

Silopren™ Electro 242-1 TP 3717 is a two-component liquid silicone rubber for injection molding processes. This silicone rubber is particularly developed for the manufacturing of housing and weather sheds for all kinds of insulators.Key Features and BenefitsVulcanisates consisting of Silopren™ Electro 242-1 TP 3717 are distinguished by the following properties: outstanding aging behavior and weather resistance fast hydrophobicity transfer and hydrophobicity recovery rapid vulcanisation excellent dielectric behavior over a wide range of temperatures very good tracking and arc resistance very good flowability high stability and flexibility at low temperatures excellent stability to ozone and ultraviolet light not readily combustible, does not melt or drip easy pigmentable with LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ Electro 242-1 TP 3717 is particularly suitable for the following elastomeric articles: suspension and long rod insulators, post line and pin insulators, surge arresters, hollow core insulators, high voltage plugs, cable connectors, fittings and terminals s.o.

Silquest™* A-137 silane is a monomeric alkylalkoxysilane that, when exposed to moisture, is reactive with minerals contained in concrete, masonry and other substrates. The monomer can penetrate deeply into a substrate, and then react to form an extremely durable protective surface surrounding each microscopic particle.

SPUR+™ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in industrial and transportation applications where higher tensile strength is required.

LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.

SPUR+™ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required.

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

Silopren™ LSR 7060 liquid silicone rubber is a two-component, high-transparency, medium-hardness, low-viscosity, fast-cure speed and ultra clear liquidsilicone rubber (LSR). Providing good optical clarity, Silopren™ LSR 7060 liquid silicone rubber combines typical LSR properties, such as high temperaturestability and flowability, with excellent UV and blue light stability. As a result, molded lenses produced using this material can exhibit excellent durabilityand maintain optical clarity, even if exposed to high temperatures or UV light. Due to its high flowability, Silopren™ LSR 7060 liquid silicone rubber can helpenable excellence in manufacturing complex and micro-structure optical lenses, even in large quantities, utilizing the injection and compression moldingprocesses.Key Features and Typical Benefits Optical Clarity Durability Design Freedom Productivity Potential Applications Interior and exterior lighting - lenses and other illumination optics Automotive lighting - lenses and light guides Electronics - Mobile phones, flash lenses, sensing lenses, light guides and other optics Solar - primary optics for concentrating PVs.

Silopren™ LSR 7070 FC by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Automotive. It is available in Liquid form.

LIM™ 6061 is the next generation in 60-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounds, and valve parts can be made readily from LIM6061 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications sports goggles and masks health care profiles camera parts coating metal rolls.

Silquest™ A-151 silane (vinyltriethoxysilane) is a general-purpose coupling agent used with mineral-filled polyolefin and elastomeric compounds. Silquest™ A-151 silane can be added as a monomer during emulsion polymerization to form silane-modified latexes that function as crosslinkers, forming very stable Si-O-Si linkages.

CoatOSil™ 2059 silicone emulsion is a solvent-free, fourmulated without APEO water-based emulsion of an amino functional siloxane formulated without alkylphenol ethoxylate (APEO).

Silopren™ Matrix 70 and 80 two-component liquid silicone rubber for injection molding processes contain polymeric fibers, which help reinforce molded articles while maintaining LSR's excellent processing properties.Key Features and Typical BenefitsVulcanizates consisting of Silopren™ Matrix LSR are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Good rubber-like properties High modulus High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ Matrix LSR is an excellent candidate to consider for use in the following elastomeric articles: Membranes Pressure hoses Exhaust hangers Watchbands Belts.

TSR117 Silicone is a Helping deliver heat, chemical and weather resistance to paints, TSR117 silicone can also help provide electrical insulating properties. In fact, insulation varnishes employing TSR117 coating have met class H insulation requirements for electrical devices. TSR117 silicone coating can be cured at high temperature; or, with the help of a catalyst, undergo low-temperature cure and room-temperature drying.

Silopren™ LSR 2670 FC by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.

LIM™ 6050 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6050 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150C (302F) to 205C (400F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.