Products

CERETAN® ME 0825 WD is a spherical, micronized, surface-modified Polyethylene wax and have uses in Paints and coatings and Printing Inks. This product have very good scratch- and abrasion resistance properties.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

CERETAN® ME 0825 is a spherical, micronized non polar Polyethylene wax and have applications as Paints and coatings, e.g. powder-, can-, car-, industrial-, building-, furniture- and floor coatings, and as Printing inks e.g. gravure-, overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

ZINPLEX 15 contains 13.2% zinc metal ions that can be used to crosslink aqueous carboxylated polymers. This crosslinking or complexing takes place as the coating dries at either room temperature or under forced dry or higher baking conditions.

only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

AGITAN 218 is a defoamer for all common emulsion systems.

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

EDAPLAN LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

CERETAN® MX 9820 is a spherical, micronized Polyolefin wax. This product have applications in Printing inks, especially for gravure- and flexo inks, Paints and coatings, especially for powder-, furniture-, parquet- and industrial coatings and Masterbatch.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

CERETAN® MXF 9820 D is a spherical, micronized Polyolefin wax, coated with PTFE.This product have applications as Paints and coatings, Printing Inks.PTFE coated functional blend, which helps to reduce the amount of PTFE used in your system by more than 10%. It provides better clarity and improved surface properties due to immediate performance of PTFE on the surface.

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

CERETAN® MXF 9510 D is a spherical, micronized functional blend, coated with PTFE. This product have applications in Paints and coatings and Printing Inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.

CERETAN® MM 8920 is a spherical, micronized modified Montan wax.This product have excellent rub and scratch resistance matting ideal surface properties wax density approx. 1,00 g/cm³ analog to water and oil, ideal for low surfactant formulations excellent adhesion on porous, uneven, flexible and soft substrates Less hydrophobic than other micronized waxes For hydrophilic systems / pigments Application are high quality paints and coatings e.g. powder, can, automotive, industrial, furniture and parquet coatings as well as UV- curing systems High quality printing inks e.g. overprint-, screen-, flexo-, offset and intaglio inks

OMBRELUB 533 is a nonionic, very finely dispersed and stable dispersion of calcium stearate in water. It is easily miscible with water at all ratios. The calcium stearate is an excellent water-repellent agent. In waterborne printing inks and external wood coatings OMBRELUB 533 is applied to increase waterproofing properties. OMBRELUB 533 is also recommended for the manufacture of concrete building components.

DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency even during the grind phase of coating manufacture. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.

AGITAN 105 is a special formulated emulsion type defoamer with excellent stability and defoaming properties. The defoamer is easy to emulsify in aqueous systems.

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

CERETAN® MP 2180 is a Micronized Polypropylene wax. This Product in paints and coatings is used as a texturing agent, matting effect, improved “soft feel” effect, scratch resistance, and in Masterbatch it is used as Temperature resistant dispersing agent, melts above ca. 150 °C, lubricant.

CERETAN® MX 9510 is a spherical, micronized functional blend.increased abrasion resistance increased scratch resistance very good dispersing properties and -compatibility very good anti- blocking Application Paints and coatings, e.g. powder-, can-, furniture-, parquet- and industrial, Coatings Printing inks, e.g. overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks,CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

CERETAN® MA 7019 is a micronized Ethylene-bis-Stearamide-wax [EBS]. This product have applications in Paints and coatings, e.g. powder-, industrial-, furniture- and parquet coatings.These micronized amide waxes show very good performances with all pigment and plastic applications, especially PS and ABS.

AGITAN 280 is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems.

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

AGITAN® DF 999 should be used without further dilution. The defoamer is Mineral oil-free, no adverse effect on printing rollers, retains heigh efficiency, encourages drainage and collapse of colloid stabilized foams.

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

WÜKONIL® HS is a polymer wax-dispersion for waterborne coating systems.Properties and advantages are improves scrub resistance Improves slip Improves blocking stability Very low particle size. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

CERETAN® MXD 3920 is a spherical, micronized functional blend, with a coating, which provides diamond-like hardness.Properties are excellent surface hardness (Mohshardness 10), excellent scratch resistance. Applications in Paints and coatings, e. g. industrial coatings, powder coatings, wood coatings, Can und Coil Coating.Functional blend with a coating of diamond-like hardness, which provides superior surface hardness. It is harder than pure PTFE and can be used in lower amounts.

CERETAN® MF 5108 is a micronized Polytetrafluoroethylene (PTFE). This product have applications inPaints and coatings, Printing inks and Technical applications.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

FOAMTROL 10L is a versatile, low viscosity and stable silicone emulsion effective in floor care products, wood coatings, lens polishes and in tank-side, non-FDA applications.

CERETAN® MT 9120 is a high melting, spherical, micronized Fischer Tropsch wax.This product have applications in Paints and coatings and Printing inks. CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.