Products

AGITAN DF 6420 is a defoamer for solvent based systems. It provides the following properties: Versatile efficiency in non aqueous systems; Can be used as supplied; Easily disperses in most organic solvents.

CERETAN® MX 9815 is a Spherical, micronized Polyolefin wax. This Product can be used as a very good scratch- and abrasion resistance, improved gloss, less dusty compared to milled waxes, very good dispersing properties and -compatibility.

ZINPLEX 15 contains 13.2% zinc metal ions that can be used to crosslink aqueous carboxylated polymers. This crosslinking or complexing takes place as the coating dries at either room temperature or under forced dry or higher baking conditions.

only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

AGITAN 218 is a defoamer for all common emulsion systems.

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

SÜDRANOL® 195 is a HDPE-emulsion being specially developed for waterbased overprint varnishes and flexo-printing inks. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

SÜDRANOL® 199 is a hard HD-Polyethylene-wax dispersion being specially developed for waterbased overprint varnishes, flexo-printing inks and the floor polish sector. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

CERETAN® MXF 10115 is a spherical, micronized polyethylene wax, coated with PTFE. This product have applications as Paints and coatings, Printing Inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

LUBA-print® WX 9825 is a water based solvent and non ionic emulsifier-system and Wax dispersion / Wachsdispersion.It is also used as aqueous lacquers and paints, aqueous flexo- and gravure printing inks to improve antiblocking, scratch- and rub resistance.

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

CERETAN® MA 7150 is a Micronized Erucamide wax. This Product is uses as a good antiblocking, excellent slip properties, good recoatability and wet printing properties, defoamer in the production of paper and cardboard, surface lubricant for the metal production.

AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.

CERETAN® MCX 6610 is a Spherical, micronized functional blend, based on Polyethylene and Carnauba wax, This Product is used as a very good antiblocking, good slip, improved gloss, very good abrasion,- scratch,- and rub resistance.

OMBRELUB 533 is a nonionic, very finely dispersed and stable dispersion of calcium stearate in water. It is easily miscible with water at all ratios. The calcium stearate is an excellent water-repellent agent. In waterborne printing inks and external wood coatings OMBRELUB 533 is applied to increase waterproofing properties. OMBRELUB 533 is also recommended for the manufacture of concrete building components.

WÜKONIL® RT 50 F is an aqueous wax-dispersion for waterbased coating systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency even during the grind phase of coating manufacture. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

LUBA-print® W 5800 is a wax dispersion / wachsdispersion product.This product have applications and properties aqueous lacquer systems: improve slip property and mar resistance Aqueous printing inks: improve rub and mar resistance with good gloss stability. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN 280 is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems.

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

AGITAN® DF 999 should be used without further dilution. The defoamer is Mineral oil-free, no adverse effect on printing rollers, retains heigh efficiency, encourages drainage and collapse of colloid stabilized foams.

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

CERETAN® MT 9015 is a spherical, micronized Fischer Tropsch wax.CERETAN® MT 9015 have improved scratch resistance, especially suited for thin layers and hydrophobizing. Applications in Paints and coatings, e.g. powder-, can-, coil-, auto-, industrial-, furniture and parquet coatings Printing inks e.g. gravure-, overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

CERETAN® MT 9115 is a high melting, spherical, micronized Fischer Tropsch wax. This Product is used as a very good scratch resistance, improved gloss, improved slip, good antiblocking and hydrophobizing.

A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. DEE FO 215 can be utilized in OPV, emulsion polymers of all chemistries, and high gloss industrial coatings.

AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

WÜKONIL® HS is a polymer wax-dispersion for waterborne coating systems.Properties and advantages are improves scrub resistance Improves slip Improves blocking stability Very low particle size. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

LUBA-print® 2036 A is a Wax dispersion / Wachsdispersion. It is used as a solvent-based and aqueous gravure and flexo-printing inks which is used to improve rub resistance, and solvent-based and aqueous lacquers which is used to improve mar resistance and slip property.

CERETAN® MXF 10325 is a spherical, micronized polyethylene wax, coated with PTFE.This product have applications as Paints and coatings, Printing Inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.