Products

ZINPLEX 15 contains 13.2% zinc metal ions that can be used to crosslink aqueous carboxylated polymers. This crosslinking or complexing takes place as the coating dries at either room temperature or under forced dry or higher baking conditions.

AGITAN 218 is a defoamer for all common emulsion systems.

only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

METOLAT® P 590 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 590 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 590 leads to a faster wetting of the pigment surface and prevents reagglomeration.

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency even during the grind phase of coating manufacture. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.

AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

METOLAT® P 588 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 588 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 588 leads to a faster wetting of the pigment surface and prevents reagglomeration.

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

METOLAT P 861 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 861 reduces the shrinkage in cementitious systems and acts as coalescent in powder paints.

AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

WÜKONIL® HS is a polymer wax-dispersion for waterborne coating systems.Properties and advantages are improves scrub resistance Improves slip Improves blocking stability Very low particle size. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

WÜKONIL® HB 4000 is a wax-dspersion free of emulsifiers for application as additive in waterborne polymer systems.Properties and advantages are good hydrophobicity Improves early rain-resistance Improves \"antisticking\" Improves workability Reducing of skinning at thick coat systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN 232 has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing.

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. TAFIGEL PUR 82 is suitable for indirect food contact applications.

AGITAN 526 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 526 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

AGITAN P 833 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 833 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

FOAMTROL 10L is a versatile, low viscosity and stable silicone emulsion effective in floor care products, wood coatings, lens polishes and in tank-side, non-FDA applications.

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

METOLAT P 854 is recommended for use in dry mixtures which are to be blended or diluted with water prior to application. The use of METOLAT P 854 significantly improves wetting of pigments and extenders.

A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. DEE FO 215 can be utilized in OPV, emulsion polymers of all chemistries, and high gloss industrial coatings.

AGITAN 280 is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems.

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

AGITAN® DF 999 should be used without further dilution. The defoamer is Mineral oil-free, no adverse effect on printing rollers, retains heigh efficiency, encourages drainage and collapse of colloid stabilized foams.

AGITAN® DF 6027 is a defoamer for all common emulsion systems. It provides the following properties which is mineral oil free, encourages drainage and collapse of colloid stabilized foams retains high efficiency.

LUBA-print® 154/C is a Wax dispersion / Wachsdispersion. It is also used as aqueous paint-systems, to improve slip and mar resistance. aqueous flexo printing inks to improve the rub resistance. Hot melts, to improve antiblocking properties.

AGITAN 700 is a modification of AGITAN 701 with an improved emulsifiability.AGITAN 700 therefore is easiliy emulsifiable. It is particularly effective in water reducible systems and aqueous gloss emulsion systems.

AGITAN 361 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems. Due to its high emulsifiability in water the defoamer is ideal for clear coats, non-pigmented and low viscous systems and emulsion manufacturing.

AGITAN P 823 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 823 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 823 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.