Products

Naxcat® MOD ACID 35 is an aromatic sulfonic acid, a blend of acids that offers a lower water concentration than Naxcat® MOD ACID. It has a TSA/XSA blend, promoting a low freezing temperature for easy handling while maintaining a high degree of acidity.

Naxonac® 1595 is an anionic surfactant that can be used as an emulsifier in agrochemical and cleaning formulations due to its stability at high temperatures and in alkaline and electrolyte systems. It is also advantageous as it can act as a hydrotrope to couple nonionic surfactant systems that are not soluble, thereby increasing wetting and detergency properties.

Naxamide® CD-231 is a 2:1 modified amide that acts as a foam booster and increases detergent effectiveness synergistically with other surfactants, such as anionic systems. In liquid formulations, it will increase viscosity without increasing the cloud point, as well as act as an emollient to increase mildness. Additionally, it can be used as a textile scouring, softening, and sizing agent, and it exhibits good emulsification properties.

Naxonate® 40SC is an effective hydrotrope with broad formulation compatibility, boasting an active level of 40% and providing increased low-temperature stability with moderate sulfate levels. It is listed on the Cleangredients Chemical Listing and meets the criteria of the Design for the Environment (DfE).

Naxonate® ST is a free-flowing powder with high activity as a hydrotrope. It is used as an anti-caking agent in powdered detergents and is commonly chosen for low sulfate and low sulfone formulations due to its effectiveness in high concentration recipes.

Naxcat® XSA-90 is a strong, concentrated organic acid that is completely liquid. For ease of handling as compared with TSA-95. Naxcat® XSA-90 will not crystallize at low temperatures, offering acid strength and fluidity. It is comparable in strength to mineral acids such as sulfuric acid, but is especially suitable for organic reactions where an inorganic, mineral acid could cause charring, oxidation, or an unwanted chemical reaction.

Naxsoft® 60T is a high-purity anionic surfactant that provides good detergent, wetting, and foaming properties while maintaining mildness, which is beneficial in liquid detergent and wool wash formulations. It can also be used in light-duty liquid cleaners, laundry, and personal care products.

Naxcat® CSA-95 is a concentrated organic acid with excellent solvency, an advantage when working with organic chemicals in acid systems. It is used as an industrial catalyst, descaling agent, plating aid in electroplating, and as a raw material in the manufacturing of dyes and pigments. It is also an intermediate for the detergent industry, and a hydrotrope and coupler.

Naxan® PLUS UFL exhibits very fast wetting and is designed to foam the least compared to any other product in the ANS line. It is essential for specialized cleaners, such as industrial bottle wash, as foam can be a deterrent to the process. This series meets the requirements of OECD Test Method 301B and is classified as "Ultimately Biodegradable", making it suitable for the formulation of biodegradable products. It is listed on the Cleangredients Chemical listing and meets DfE criteria.

Naxcat® TSA-95 is the strongest of our organic acids and is the most suitable esterification catalyst for the production of phthalates and other plasticizers. Aromatic sulfonic acids are created by sulfonating aromatic compounds with sulfuric acid, SO3, or oleum. They are similar in strength to mineral acids like sulfuric acid, but they are particularly useful for organic reactions where an inorganic, mineral acid may cause charring, oxidation, or an unwanted chemical reaction.

Naxsoft® 98S is a versatile, economical, and highly active linear acid that is biodegradable and can be used as a component in acidic products such as aluminum cleaners and liquid bowl cleaners. It can also be neutralized with a variety of inorganic bases or organic amines to customize the sulfonate for the end product. It is listed on the Cleangredients Chemical listing and meets DfE criteria.

Naxcat® TSA-65W is 65% active toluenesulfonic acid (TSA) diluted in water. This acid is formulated for easier handling, due to its lower viscosity compared to more concentrated TSA. It is the strongest of Nease Co., LLC's organic acids and can be used for a variety of industrial applications.

Naxonac® 965 is an anionic surfactant that can be used as an emulsifier in emulsion polymerization, pesticides, and cleaning formulations due to its stability at high temperatures, high alkalinity, and electrolyte systems. Additionally, its solubility in alkali systems makes it a great hydrotrope that can be used to couple nonionic surfactant systems that are not normally soluble while simultaneously increasing wetting and detergency properties.

Naxolate® AS-LC30-K is an anionic surfactant that provides excellent detergency, emulsification, high foaming, and wetting properties. It is widely used in light-duty laundry detergents, fine fabric washes, shampoos, and many personal care applications, as well as in many formulations for its thickening effect.

Naxan® PLUS ABL exhibits good wetting, hydrotroping, and moderate foam, making it beneficial in many household and institutional product applications. It is designed to be low in color, allowing for better color management in the end product. Additionally, this series now meets the requirements of OECD Test Method 301B and is classified as "Ultimately Biodegradable," making it suitable for the formulation of biodegradable products. It is also listed on the Cleangredients Chemical listing and meets DfE criteria.

Naxchem® N-Foam 802 is a specialized blend of alkyl ether phosphate, designed for use in foaming applications and as a curing and foaming agent in resin production. When neutralized, it can be used as a cleaning agent. It is highly effective at producing stable foam.

Naxcat® MOD ACID is a blend of TSA (toluenesulfonic acid) and XSA (xylene sulfonic acid) acids that promote low freezing temperatures for ease of handling, while maintaining a high degree of acidity. Aromatic sulfonic acids are produced by sulfonating aromatic compounds with sulfuric acid, SO3, or oleum. They are comparable in strength to mineral acids, such as sulfuric acid, but are particularly suitable for organic reactions where an inorganic, mineral acid may cause charring, oxidation, or an unwanted chemical reaction.

Naxonac® 8610 is an alkyl phenol ether phosphate designed to provide emulsification, solubility, coupling, and detergency in water-soluble applications. As an anionic surfactant, one of the main advantages of the phosphate ester is its stability and solubility in alkali systems. It can be used as hydrotropes to couple nonionic surfactant systems that are not soluble and at the same time increase wetting and detergency properties.

Naxan® PLUS BFL is a unique product in our ANS product line that is the fastest wetter with good hydrotroping abilities and is designed to generate foam for applications such as carpet shampoos, liquid car washes, hand dishwashes, etc. where foam enhances the performance of the product. It meets the requirements of OECD Test Method 301B and is classified as "Ultimately Biodegradable", allowing for the formulation of biodegradable products based on the Naxan® PLUS series. This series is also listed on the Cleangredients Chemical Listing and meets DfE criteria.

Naxonate® 4LS is our standard sodium xylene sulfonate, exhibiting reduced sulfone levels, which can be imperative for achieving clarity in formulated systems, especially upon dilution. The lower sulfone content helps the formulator consistently meet customer needs, and the product is listed on the Cleangredients Chemical listing and meets DfE criteria.

Naxonate® 4AX is an effective hydrotrope used in neutral detergents and shampoos. It imparts counter-ion compatibility as well as low sulfate levels. Hydrotropes are a proven answer to solubility problems in a wide variety of commercial applications. Optimum hydrotrope selection can result in enhanced system performance.

Naxan® PLUS 220 has been designed to reduce foam when used in various applications, such as rinse aids and automatic machine washing. It meets the requirements of OECD Test Method 301B and is classified as "Ultimately Biodegradable," which is important for the protection of aquatic wildlife. It also meets the criteria of the Cleangredients Chemical Listing and the DfE, allowing the formulation of biodegradable products based on the Naxan® PLUS series of surface-active hydrotropes, while exhibiting fast wetting and good hydrotroping properties.

Naxonac® 690-50 is an alkyl phenol ether phosphate designed to meet your needs as an emulsifier, imparting corrosion resistance in the emulsion polymerization of vinyl acetate and highly carboxylated acrylics and enhancing detergency in alkaline systems. It does not discolor when used to de-dust alkaline powders.

Naxonate® 45SC is our most effective hydrotrope, with an active level of 45%. It requires slightly higher storage temperatures and has moderate sulfate levels. Additionally, it is listed on the Cleangredients Chemical listing and also meets the DfE criteria.

Naxonate® 4KT is a highly effective hydrotrope with performance similar to that of sodium xylenesulfonate and sodium toluenesulfonate. It imparts counter-ion compatibility. The major advantage of using Naxonate® 4KT in formulations is that it has a lower sulfate content compared to SXS and STS.

Naxsoft® NA-8 is an aqueous solution of a primary alkane sulfonate which exhibits low foaming, excellent coupling properties, and is biodegradable. It has excellent hydrotrope and wetting properties in both high and low pH systems, is soluble in both highly acidic and basic formulations, and is compatible with bleach. Naxsoft® NA-8 is listed on the Cleangredients Chemical listing and meets DfE criteria.

Naxan® 110 has excellent wetting and hydrotroping properties with moderate foaming, making it suitable as a condensate for use primarily as dispersants in a wide variety of industrial applications. It falls between Naxan® ABL and Naxan® 220 in terms of foaming and wetting capabilities.

Naxan® DIL is a unique product in our offering, being the lightest in color and having a low odor, very fast wetting, and good hydrotropic properties. It is also the most hydrophobic product in our line, which is an advantage in formulations requiring "rinse off" functionality, as well as allowing for better color management in the end product when low color is essential.

Naxsoft® 40S is an anionic surfactant exhibiting a combination of good foam and detergency performance at a low cost, making it an excellent choice as a basic surfactant for compounding all-purpose cleaners, liquid dishwashing products, hard surface cleaners, and foamers.

Naxan® PLUS AAL exhibits good wetting, hydrotroping, and moderate foam and has a darker color than Naxan® PLUS ABL. It is designed for industrial applications where color is not crucial to the end product. This series now meets the requirements of OECD Test Method 301B and is classified as "ultimately biodegradable" as well as non-toxic to aquatic life, making it possible to formulate biodegradable products based on the Naxan® PLUS series of surface-active hydrotropes. Additionally, the Naxan® PLUS series is listed on the Cleangredients Chemical listing and meets DfE criteria.

Naxonate® 4ST is an ideal hydrotrope for liquid detergents, with similar coupling performance to sodium xylenesulfonate but lower sulfate and sulfone levels. It generates essentially no foam or wetting action and has minimal influence on surface tension, providing a cost-effective way to solubilize complex formulas, elevate cloud points, and control viscosity.

Peractive™ CB is a multifunctional ingredient consisting of tetraacetylethylenediamine (TAED), which efficiently and economically fulfills a number of tasks in the washing process. Its many functions include a worldwide bleaching system, improved pre-soak formulations with the use of Peractive R, good water solubility, the elimination of unpleasant odors, and dye transfer inhibition.

Naxonac® 184 is an anionic surfactant designed to meet multiple needs in metalworking fluids. It serves as an emulsifier, wetting agent, anti-wear additive, corrosion inhibitor, and lubricant. Its stability and solubility in alkali systems are some of the main advantages of phosphate esters. It can also be used as a hydrotrope to couple nonionic surfactant systems that are not soluble, while at the same time increasing wetting and detergency properties. With these features, Naxonac® 184 is an excellent choice for metalworking applications.

Peractive™ AC White is a multifunctional ingredient consisting of tetraacetylethylenediamine (TAED), which efficiently and economically fulfills a number of tasks in the washing process. Its many functions include a worldwide bleaching system, improved pre-soak formulations with the use of Peractive R, good water solubility, the elimination of unpleasant odors, and dye transfer inhibition.

Peractive™ AC Green is a multifunctional ingredient consisting of tetraacetylethylenediamine (TAED), which efficiently and economically fulfills a number of tasks in the washing process. Its many functions include a worldwide bleaching system, improved pre-soak formulations with the use of Peractive R, good water solubility, the elimination of unpleasant odors, and dye transfer inhibition.

WeylClean® SKS-6 WB is a layered sodium disilicate, a modern water softening system that works via ion exchange processes without the formation of precipitates. It shows excellent calcium and magnesium ion elimination, especially at low water hardness conditions. It is compatible with sensitive detergent additives and has good heavy metal binding capacity.