Products

Naxonate® 4LS is our standard sodium xylene sulfonate, exhibiting reduced sulfone levels, which can be imperative for achieving clarity in formulated systems, especially upon dilution. The lower sulfone content helps the formulator consistently meet customer needs, and the product is listed on the Cleangredients Chemical listing and meets DfE criteria.

Naxonac® 690-50 is an alkyl phenol ether phosphate designed to meet your needs as an emulsifier, imparting corrosion resistance in the emulsion polymerization of vinyl acetate and highly carboxylated acrylics and enhancing detergency in alkaline systems. It does not discolor when used to de-dust alkaline powders.

Naxonate® 40SC is an effective hydrotrope with broad formulation compatibility, boasting an active level of 40% and providing increased low-temperature stability with moderate sulfate levels. It is listed on the Cleangredients Chemical Listing and meets the criteria of the Design for the Environment (DfE).

Naxonac® 8610 is an alkyl phenol ether phosphate designed to provide emulsification, solubility, coupling, and detergency in water-soluble applications. As an anionic surfactant, one of the main advantages of the phosphate ester is its stability and solubility in alkali systems. It can be used as hydrotropes to couple nonionic surfactant systems that are not soluble and at the same time increase wetting and detergency properties.

Naxamide® CD-231 is a 2:1 modified amide that acts as a foam booster and increases detergent effectiveness synergistically with other surfactants, such as anionic systems. In liquid formulations, it will increase viscosity without increasing the cloud point, as well as act as an emollient to increase mildness. Additionally, it can be used as a textile scouring, softening, and sizing agent, and it exhibits good emulsification properties.

Naxsoft® 40S is an anionic surfactant exhibiting a combination of good foam and detergency performance at a low cost, making it an excellent choice as a basic surfactant for compounding all-purpose cleaners, liquid dishwashing products, hard surface cleaners, and foamers.

Naxonate® 45SC is our most effective hydrotrope, with an active level of 45%. It requires slightly higher storage temperatures and has moderate sulfate levels. Additionally, it is listed on the Cleangredients Chemical listing and also meets the DfE criteria.

Naxonate® 4AX is an effective hydrotrope used in neutral detergents and shampoos. It imparts counter-ion compatibility as well as low sulfate levels. Hydrotropes are a proven answer to solubility problems in a wide variety of commercial applications. Optimum hydrotrope selection can result in enhanced system performance.

Naxolate® AS-LC30-K is an anionic surfactant that provides excellent detergency, emulsification, high foaming, and wetting properties. It is widely used in light-duty laundry detergents, fine fabric washes, shampoos, and many personal care applications, as well as in many formulations for its thickening effect.

Naxonac® 965 is an anionic surfactant that can be used as an emulsifier in emulsion polymerization, pesticides, and cleaning formulations due to its stability at high temperatures, high alkalinity, and electrolyte systems. Additionally, its solubility in alkali systems makes it a great hydrotrope that can be used to couple nonionic surfactant systems that are not normally soluble while simultaneously increasing wetting and detergency properties.