Products

Nilit NILAMID® A3 GF30 TF15 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 15% PTFE.This compound is intended for injection molding.NILAMID® A3 GF30 TF15 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® A3 J10 GF13 is a Polyamide 66 (Nylon 66) compound, 13% glass fiber reinforced, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A3 J10 GF13 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® A3 W GF55 is a Polyamide 66 (Nylon 66) compound, 55% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 W GF55 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 MGF2010 is a Polyamide 66 (Nylon 66) compound, 10% glass fiber reinforced, 20% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® A3 MGF2010 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® XS1 GF50 is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 50% glass fiber reinforced, low warpage.

Nilit Nilamid® XS3 GF40 is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 40% glass fiber reinforced.

Nilit Nilamid® XT4 GF30 is a specialty PPA compound designed for applications with thermal requirements significantly higher than those of polyamide 6.6 high stiffness and strength at elevated temperatures high dimensional stability excellent creep resistance resistance to chemicals and hydrolysis PPA, 30% glass fiber reinforced, heat stabilized, designed for improved cycle time.

Nilit Nilamid® XT4 GF50 is a specialty PPA compound designed for applications with thermal requirements significantly higher than those of polyamide 6.6 high stiffness and strength at elevated temperatures high dimensional stability excellent creep resistance resistance to chemicals and hydrolysis PPA, 50% glass fiber reinforced, heat stabilized, designed for improved cycle time.

Nilit NILAMID® B3 GF30 TM2 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® B3 GF30 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit Nilamid® B3 VNGF30 is a nilamid® a3 vngf30 is a cross linkable polyamide 6 (nylon 6) compound, 30% glass fiber reinforced.This compound is intended for injection molding.Nilamid® a3 vngf30 is primarily designed for electrical and electronic industry. It is also suitable for automotive applications.

Nilit NILAMID® B3 GF50 is a Polyamide 6 (Nylon 6) compound, 50% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® XS3 GF55 TF10 is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 55% glass fiber reinforced, 10% ptfe lubricated.

Nilit NILAMID® A3 HHR GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, heat and hydrolisis stabilized.This compound is intended for injection molding.NILAMID® A3 HHR GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 GF50 TM2 is a Polyamide 66 (Nylon 66) compound, 50% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 GF50 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 GCF2006 is a Polyamide 6 (Nylon 6) compound, 20% glass fiber and carbon fiber reinforced.This compound is intended for injection molding.NILAMID® B3 GCF2006 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® B3 HHR GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, heat and hydrolisis stabilized.This compound is intended for injection molding.NILAMID® B3 HHR GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® XT6 GF30 is a specialty PPA compound designed for applications with thermal requirements significantly higher than those of polyamide 6.6 high stiffness and strength at elevated temperatures high dimensional stability excellent creep resistance resistance to chemicals and hydrolysis PPA, 30% glass fiber reinforced, heat stabilized.

Nilit NILAMID® A3 GF50 is a Polyamide 66 (Nylon 66) compound, 50% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 VNGF30 is a cross linkable Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced.This compound is intended for injection molding.NILAMID® A3 VNGF30 is primarily designed for Electrical and Electronic industry. It is also suitable for Automotive applications.

Nilit NILAMID® A3 HH GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, high heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 HH GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® XS3 GF50/FA is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 50% glass fiber reinforced, suitable for food contact and drinking water.

Nilit NILAMID® A3 GF30 TF20 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 20% PTFE, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF30 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® C3 GF30 is a Polyamide 66/6 (Nylon 66/6) compound, 30% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® C3 GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B2 HH GF60 is a Polyamide 6 (Nylon 6) compound, 60% glass fiber reinforced, high heat stabilized.This high stiffness and glossy finish compound is intended for injection molding.NILAMID® B2 HH GF60 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 WR GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, peroxides stabilized, UL listed HB.It is WRAS certified.This compound is intended for injection molding.NILAMID® A3 WR GF30 is primarily designed for the Industrial & Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 J05 GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, impact modified.This compound is intended for injection molding.NILAMID® B3 J05 GF30 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit Nilamid® XT1 GF50 is a specialty PPA compound designed for applications with thermal - requirements significantly higher than those of - polyamide 6.6 high stiffness and strength at elevated - temperatures high dimensional stability excellent creep resistance resistance to chemicals and hydrolysis PPA, 50% glass fiber reinforced, heat stabilized, for the highest temperature applications.

Nilit NILAMID® A3 J10 GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, impact modified.This compound is intended for injection molding.NILAMID® A3 J10 GF30 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit Nilamid® XS3 GF60 is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 60% glass fiber reinforced.

Nilit Nilamid® XT1 GF30 is a specialty PPA compound designed for applications with thermal - requirements significantly higher than those of - polyamide 6.6 high stiffness and strength at elevated - temperatures high dimensional stability excellent creep resistance resistance to chemicals and hydrolysis PPA, 30% glass fiber reinforced, heat stabilized, for the highest temperature applications.

Nilit Nilamid® XS1 GF65 is a specialty partially aromatic polyamide blend developed as alternative to metal good stiffness and tensile strength very low warpage very good creep resistance excellent surface quality high dimensional stability performance independent from environmental conditions partially aromatic pa, 65% glass fiber reinforced, low warpage.

Nilit NILAMID® A3 W GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 W GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 H GF15 TP07S is a Polyamide 66 (Nylon 66) compound, 15% glass fiber reinforced, low wear and friction, heat stabilized.This compound is intended for injection molding.NILAMID® A3 H GF15 TP07S is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 W GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 GF30 is a Polyamide 66 (Nylon 66) compound 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.