Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- APPLICATION CONDITIONS
Ambient and surface temperature should be similar and between 7°C to 45°C (45°F to 113°F). Warming surfaces and surrounding air is a good option when working in colder temperatures. Relative humidity should be below 85% and dew point is maintained 3°C (5°F) above substrate temperature for the duration of the application. Always protect the area from contaminates and direct sunlight.
- APPLICATION INSTRUCTIONS (23°C / 73°F)
Apply two coats 30 minutes apart by brush, roller, or spray. Metal surface preparation includes grit-blasting using standard SSPC-SP10 near white including a 2-3 mil profile. Other forms of surface preparation are possible and should be tested individually to assure adequate adhesion strength. When bonding Polyurethane together only one coat (25 micron or .001”) after surface preparation is required.
Working Time: 4 to 6 hours
Dry Times: 30 min.
DFT: 50 micron (.002”)
Recoat Time: Minimum 30 min. maximum 5 days, free from contaminants
Clean up: Non oil based solvent such as Ethyl AcetateMIXING INSTRUCTIONS:
Mechanical mix by stirring and shaking
Appearance: Amber clear
Induction time: 5 minutes
Mix Ratio by volume: 3A:1B
Mix Ratio by weight: 100A: 33B
Dilution: Up to 50% MEK (Methyl Ethyl Ketone)
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Mixed Viscosity | 62.0 | cps | - |
| Flash Point | -5(23) | °C(°F) | - |
| Solids content | 48.0 | % | - |
| Required DFT | 50 (.002) | micron(”) | - |
| Theoretical coverage (50 micron/kg (40sqft (.002”/lb)) | 8.2 | sqm | - |
Packaging & Availability
- Available Kit Sizes
400 g, 1 kg, 3 kg, 15 kg, 60 kg
Storage & Handling
- Storage
Storage: Under 27°C (80°F) away from heat, sparks, and open flame.
Shelf life: 3 years, unopened