Products

NORMAC NP-5001 is a single-component polymer-based metal primer. Designed for use with any NORMAC 900 series cold bond cement to increase adhesion strength and protect metal surfaces from corrosion. Apply one coat after proper surface preparation which includes cleaning and mechanical roughening.

A cold bonding cement with no CFCs, NA-900E Ultra is designed for fast initial bond strength to get jobs done quickly and back to service. It is a 2-part system using Chloroprene Rubber providing excellent results.

NORMAC NP-9500 is a two-component, polymer-based priming system designed for superior adhesive strength and corrosion resistance to properly prepared substrates. For bonding Polyurethane to ferrous and non-ferrous metal, carbon fiber, fiberglass, concrete and some plastics. Easily applied by brush, roller, or sprayer to achieve a uniform DFT.

NA-900R is a non-flammable, cold bonding cement that is designed for fast initial bond strength to get jobs done quickly and back to service. It is a 2-part system using Chloroprene Rubber providing excellent results.

NORMAC NP-8400 is a single-component polymer-based primer for bonding Polyurethane to Rubber. May also be used to bond Polyurethanes together. Expect excellent bond strength in under two hours for standard conveyor belt rubber.

A non-flammable, two-component cold bonding cement using chloroprene designed to bond rubber, metal, fiberglass, fabric, concrete, and wood substrates together quickly with excellent initial bond strength without the aid of heat, pressure, or special equipment. Using carboxylate technology we gain approx. 15°C for max operating temperature when compared to other cement system

NORMAC NA-900E is a CFC-free, two-component chloroprene based cold bonding cement designed to bond rubber, metal, fiberglass, fabric, concrete, and wood substrates together with excellent initial bond strength without the aid of heat, pressure, or special equipment.

A CFC-free, quick drying polymer based cold bond plastic cement designed for use with PVC and Polyurethane conveyor belts and other parts. A two-part system that produces excellent initial and final adhesion strength.

NORMAC NP-9600 is a two-component polymer-based wash primer used as a first coat over prepared metal surfaces to increase anticorrosive properties for corrosion critical or immersion service. Always over-coated with NP-9500 to complete the priming system.

NORMAC NP-100 is a two-component 100% solids epoxy-based concrete primer. Designed with extended working times to maximize surface penetration. Applied to concrete surfaces that are cured for a minimum of 28 days with less than 15% moisture content. Coverage rates will depend on surface roughness and porosity.