Products

NR-200 solvent based two component Polyurethane coating has a hardness of 65A and is extremely adaptable utilizing additives to find unique solutions while using inexpensive simple to use equipment. Easily applied using standard airless or conventional spray equipment as well by brush or roller. Designed for the aviation industry to fight aggressive abrasion and shows impressive resistance against jet fuel and oils.

NR-45LVHS 100% solids 2:1 Polyurethane spray coating has excellent abrasion resistance where very soft high elongation coatings are required. It is very pliable and similar to soft rubber. This specialty formulation also excels where noise abatement and friction control are paramount. In addition, its flexible characteristics make it ideal for scratch and mark protection.

A non-flammable, two-component cold bonding cement using chloroprene designed to bond rubber, metal, fiberglass, fabric, concrete, and wood substrates together quickly with excellent initial bond strength without the aid of heat, pressure, or special equipment. Using carboxylate technology we gain approx. 15°C for max operating temperature when compared to other cement system

NORMAC NA-900E is a CFC-free, two-component chloroprene based cold bonding cement designed to bond rubber, metal, fiberglass, fabric, concrete, and wood substrates together with excellent initial bond strength without the aid of heat, pressure, or special equipment.

NR-95LVHS100% solids 2:1 Polyurethane spray coating has tremendous resiliency based on its low free PTMEG Polyether chemistry. Designed for use in the most dynamic dry, wet, and immersion corrosive small particle abrasion environments. Easily processed resulting in a hard surface promoting the flow of materials. Non-stick cleanability also makes it attractive for many material handling applications.

NORMAC NP-5001 is a single-component polymer-based metal primer. Designed for use with any NORMAC 900 series cold bond cement to increase adhesion strength and protect metal surfaces from corrosion. Apply one coat after proper surface preparation which includes cleaning and mechanical roughening.

BR-3S solvent based two component polyurethane spray coating has a hardness of 80A and is extremely adaptable utilizing additives to find unique solutions while using inexpensive simple to use equipment. Easily applied using standard airless or conventional spray equipment as well by brush or roller. Designed for use in dynamic wet and dry small particle abrasion environments, this product excels in applications that include raw material processing, mineral extraction/floatation, pipes, and mixing/agitation.

NR-60LVHS100% solids 2:1 Polyurethane spray coating has unique soft elastomer qualities based on its PTMEG low free Polyether chemistry. Shows excellent abrasion resistance where softer coatings are required. This specialty formulation also excels where noise abatement and friction control are essential. It has self healing characteristics and performs well in impingement type applications both wet and dry

NR-5SFsolvent based two component Polyurethane coating has a hardness of 90A and is extremely adaptable utilizing additives to find unique solutions while using inexpensive simple to use equipment. Easily applied using standard airless or conventional spray equipment as well by brush or roller. Designed for use in dynamic wet and dry small particle abrasion environments this product also excels where non-marking, noise abatement and friction control are important. Widely used on small parts handling equipment including vibratory feeder bowls.

NR-7Ssolvent based Polyurethane spray coating has a hardness of 60D and is extremely adaptable utilizing additives to find unique solutions while using inexpensive simple to use equipment. Easily applied using standard airless or conventional spray equipment as well by brush or roller. This product offers a very low coefficient of friction allowing for applications that require non-sticking, improved material flow rates, and easy cleaning

NORMAC NP-9600 is a two-component polymer-based wash primer used as a first coat over prepared metal surfaces to increase anticorrosive properties for corrosion critical or immersion service. Always over-coated with NP-9500 to complete the priming system.

A CFC-free, quick drying polymer based cold bond plastic cement designed for use with PVC and Polyurethane conveyor belts and other parts. A two-part system that produces excellent initial and final adhesion strength.

NR-5Ssolvent based two component Polyurethane coating has a hardness of 90A and is extremely adaptable utilizing additives to find unique solutions while using inexpensive simple to use equipment. Easily applied using standard airless or conventional spray equipment as well by brush or roller. Designed for use in dynamic wet and dry small particle abrasion environments this product also excels where non-marking, noise abatement and friction control are important. Widely used on small parts handling equipment including vibratory feeder bowls.

NR-95LVHS100% solids 2:1 Polyurethane spray coating has tremendous resiliency based on its low free PTMEG Polyether chemistry. Designed for use in the most dynamic dry, wet, and immersion corrosive small particle abrasion environments. Easily processed resulting in a hard surface promoting the flow of materials. Non-stick cleanability also makes it attractive for many material handling applications.

NORMAC NP-8400 is a single-component polymer-based primer for bonding Polyurethane to Rubber. May also be used to bond Polyurethanes together. Expect excellent bond strength in under two hours for standard conveyor belt rubber.

NA-900R is a non-flammable, cold bonding cement that is designed for fast initial bond strength to get jobs done quickly and back to service. It is a 2-part system using Chloroprene Rubber providing excellent results.

A cold bonding cement with no CFCs, NA-900E Ultra is designed for fast initial bond strength to get jobs done quickly and back to service. It is a 2-part system using Chloroprene Rubber providing excellent results.

NR-2Ssolvent based two component Polyurethane coating that has a soft durometer of 45A and is extremely adaptable utilizing additives to find unique solutions while using inexpensive simple to use equipment. Easily applied using standard airless or conventional spray equipment as well by brush or roller. A premium grade rubber like elastomer suitable for high sliding abrasion resistance or where high friction values are required

NORMAC NP-9500 is a two-component, polymer-based priming system designed for superior adhesive strength and corrosion resistance to properly prepared substrates. For bonding Polyurethane to ferrous and non-ferrous metal, carbon fiber, fiberglass, concrete and some plastics. Easily applied by brush, roller, or sprayer to achieve a uniform DFT.

NR-70LVHS 100% solids 2:1 Polyurethane spray coating is based on its PTMEG low free Polyether chemistry and is easily processed. This versatile product allows for higher abrasion and puncture resistance while maintaining friction control. The 70LVHS also has self healing characteristics making it an interesting option for specialty applications.

BR-3SFsolvent based two component Polyurethane coating has a hardness of 80A and is extremely adaptable utilizing additives to find unique solutions while using inexpensive simple to use equipment. Easily applied using standard airless or conventional spray equipment as well by brush or roller. Designed for use in dynamic wet and dry small particle abrasion environments. This product excels in applications that include raw material processing, mineral extraction/floatation, pipes, and mixing/agitation.

NORMAC NP-100 is a two-component 100% solids epoxy-based concrete primer. Designed with extended working times to maximize surface penetration. Applied to concrete surfaces that are cured for a minimum of 28 days with less than 15% moisture content. Coverage rates will depend on surface roughness and porosity.