Products

THINPREG™ TP 736LT is an exceptionally versatile hot-melt, epoxy prepreg. It can be cured at temperature as low as 80°C (176°F), or can be used for faster molding of components at 120°C (248°F). This is achieved with a good out-life of up to 60 days at 18-22°C (64-72°C)..

THINPREG™ TP 150SC is designed for the automotive market due to the snap-cure capability for low TAKT times while achieving good mechanical properties, and the additional benefit of not requiring frozen or refrigerated storage.

THINPREG™ TP 190 is a system designed for aeronautic structural part, combining high strength and high toughness with a very good thermal stability. The PES-toughened epoxy system shows outstanding compression and fatigue properties.

THINPREG™ TP 402 is a resin system suitable for manufacture of unidirectional prepreg material. ThinPreg™ 402 is a versatile system that is used most often with carbon fiber, but can also be impregnated into a wide range of reinforcing fibers including quartz, glass, aramid fiber etc. ThinPreg™ 402 features a high Tg (180°C) capability with additional toughening, and has been designed to be a good all-round product in terms of mechanical strength and processability.

THINPREG™ TP 380CE is a Uni-Directional tape made of Carbon fibers impregnated with a thermoset cyanate ester resin system. ThinPreg™ 380CE uses a high Tg resin well adapted to autoclave molding at 180°C (350°F) with post-curing. The Fiber Areal Weight of ThinPreg™ 380CE ranges from 30g/m2 to 300g/m2 and the standard resin content ranges from 32 to 42% by weight. The North Thin Ply Technology process allows for the adjustment of the fiber / resin ratio upon request.