Products

Nouryon Berolamine 1210 (BA-1210) is a blend of higher polyethylene polyamines (isomers of TETA, TEPA, PEHA, and higher) and alkanolamines (AEEA, DEA, Hydroxyethyl DETA, and higher). BA-1210 is used as an intermediate in the manufacture of asphalt additives and epoxy curing agent.

Redicote 611 is a emulsifier for slow setting cationic bitumen emulsions and control additive for slurry seal.

Redicote E-6100 is a emulsifier for anionic bitumen and oil emulsions for tack coat, prime, dust oil and similar applications.

Redicote E-11 is a emulsifier for cationic slow set asphalt emulsions for tack, prime, slurry seal and cold mix applications. Break retarder for slurry.

Redicote E-11 HF is a emulsifier for cationic slow set asphalt emulsions for tack, prime, slurry seal and cold mix applications. Break retarder for slurry.

Petro® D-425 Liquid is a sodium salt of naphthalene sulfonate condensate (NSC). Anionic naphthalene sulphonate condensates are used as primary dispersants in paints.

Kling Beta 2550(HM) is a liquid antistrip for hot mix asphalt.

Wetfix AP47 is a low hazard adhesion promoter and warm mix additive.

Alcogum L 265 is a water-soluble thickener for anionic bitumen or oil emulsions, including products also containing minerals. It is an acrylate-based emulsion copolymer supplied at 30% active solids in water. This product is part of a unique line of hydrophobically modified, alkali soluble emulsion polymers typically referred to as HASE thickeners.

Kling Beta 2914 is a liquid adhesion promoter for hot and warm mix.

Redicote E-27 is a liquid cationic emulsifier for tack coats and prime coats.

Wetfix BXE is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter and coating aid for foamed bitumen cold mix.

Wetfix N422 is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter for surface dressing (chipseal).

Redicote EM22 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat.

Redicote E-7100 is a faster setting Emulsifier for Cold In-Place recycling (CIR). Emulsifier for cationic slow-setting emulsions suitable for cold mix, tack, prime, slurry seal and dust control. Can be used as an anionic emulsifier in tack and prime coat emulsions.

Kling Beta LL is a additive for cold stockpile mixes based on cutback or fluxed bitumen used for pothole patching, reinstatements and repairs.

Redicote 404 is a emulsifier for emulsions used in micro surfacing and slurry surfacing. Dope (break retarder) for slurry surfacing.

Redicote C-450-1 is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Redicote C-404 is a emulsifier for emulsions used in micro surfacing and slurry surfacing. Dope (break retarder) for slurry surfacing.

Redicote E-4875 NPF is a emulsifier for cationic slow setting emulsions suitable for tack, prime, slurry seal, cold mix and sealcoats.

Alcogum SL 827 is a water-soluble thickener for anionic bitumen or oil emulsions that is stable at high emulsion temperatures. It is easily added in the soap phase of anionic emulsions either before or after addition of alkali (see below for more information). Alcogum SL 827 may reduce settling during storage and reduce emulsifier dosage.

Redicote I-249 is a additive for clay stabilized emulsions and sealcoats derived from coal tar pitch or bitumen to improve resistance to moisture.

Redicote E-6945 is a co-emulsifier and stabilizer for slow-setting anionic bitumen emulsions used in sealcoats, slurry seal and non paving applications.

Redicote E-4880 is a cationic super slow setting emulsifier providing extended workability for virgin and recycled cold mixes produced in plant.

Wetfix BE is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cut-backs. It is an adhesion promoter and coating aid for foamed asphalt cold mix.

Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.

Redicote E-11E is a emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Emulsifier for oils and resins sed for dust control and rejuvenating. Break retarder for slurry.

Redicote C-450-S is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Redicote E-620 is a nonionic co-emulsifier and wetting agent for prime emulsion, dust control and rejuvenating oil emulsions.

Redicote E-47 NPF is a nonionic emulsifier for the production of slow-setting emulsions from bitumen, tall oil pitch, dust oils and resins.

Duomeen HT is an active adhesion promoter in solid (pellet) form for hot bitumen, cut back bitumen or soft bitumen for use in surface dressing (chipseal), and cold and warm mixes.

Redicote E-5 HF is a emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Redicote E-16 is a liquid emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal, tack coat and open graded cold mix. Active adhesion promoter for pre-coated chips, cutback or soft bitumen.

Redicote EM24 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal and open graded cold mix.

Redicote 103 is a emulsifier for high viscosity rapid and medium setting cationic bitumen emulsions.

Rediset LQ-1102C is a compaction aid for hot and warm mixes. Rediset LQ-1102C allows a reduction in mixing and paving temperatures while providing built in anti-stripping effect.