Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Two-part, optically clear silicone system
- Convenient 1:1 mix ratio (Part A:B)
Applications & Uses
- Applications
- Application Area
- Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- As an embedding or potting compound for electronic assemblies and components to provide protection from extremes humidity, radiation, thermal stress and mechanical stress
- As an adhesive in low-strength applications such as solar cell arrays where clarity and low volatility are important
- Instructions for Use
Mixing
Thoroughly mix in a convenient 1:1 mix ratio by weight prior to use. CV10-2500 is ideal for use with Static mix and dispense cartridges for easy application.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a container rated for use and at least four times the volume of the material being deaerated. Hold vacuum until bulk deaeration is complete.
Inhibition Concerns
Cures in contact with most materials. Exceptions include butyl and chlorinated rubbers, some RTV silicones and unreacted residues of some curing agents.
Note: Some bonding applications may require the use of a primer. NuSil Technology CF1-135 silicone primer is recommended.
Properties
- Appearance
- Clear
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 7,500 (7,500 ) | cP (Mpa*s) | — |
| Lap Shear | 360 (2.48 ) | psi (MPa) | — |
| Durometer Type A | 50.0 | — | — |
| Elongat ion | 130.0 | % | — |
| Mix Rat io | 0.042361111 | — | — |
| Specific Gravity | 1.02 | — | — |
| Tack Free Time | 5.0 | hours | — |
| Tensile | 1,000 (6.9 ) | psi (MPa) | — |
| Work Time | 3.0 | hours | — |
| Value | Units | Test Method / Conditions | |
| Cure System | Platinum | — | — |
| Cure at 150 °C | 15.0 | minutes | — |
Packaging & Availability
- Country Availability
- Regional Availability