Products

NuSil™ CV-1142 is a non-corrosive controlled volatility RTV silicone adhesive/sealant.

NuSil™ CV-2289-1 is a controlled volatility potting and encapsulating silicone elastomer.

NuSil™ R-2145 is a extremely tough, high durometer, fast-cure adhesive/sealant.

NuSil™ CV10-2568 is controlled volatility RTV ablative silicone. For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices.

NuSil™ MED-6755 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.Comments: 1.46 R.I., OPTICALLY CLEAR.

NuSil™ MED-4044 is a low viscosity silicone elastomer.

NuSil™ CV1-1142-4 is a non-corrosive, controlled volatility, uv tracer, RTV silicone adhesive/sealant.

NuSil™ R-2188 is a silicone potting and encapsulating elastomer.

NuSil™ R2-6755 is a clear silicone elastomer.

NuSil™ MED2-4420 is a fast cure low viscosity silicone elastomer.

NuSil™ MED-6233 is a optically clear low viscosity silicone elastomer.

NuSil™ CV-2566 is a controlled volatility RTV silicone adhesive.

NuSil™ MED-4086 is a ultra-soft low viscosity silicone elastomer.

NuSil™ GEL-8100 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: GelsComments: NuSil™ MEDium firm gel. Can be used for pressure sensors.

NuSil™ MED-6033 is a clear low viscosity silicone elastomer.

NuSil™ CV3-2289-1 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Low Viscosity, Added Micro-baloons for Bond Line Control.

NuSil™ MED-6015 is a optically clear low viscosity silicone elastomer.

LightSpan® LS-3443 is from LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical GelsComments: Soft and Tacky Gel, Penetration 5 mm.

NuSil™ CV-2644 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.005 ohm-cm, 1.2 W/m-K.

Ultra Low Outgassing SCV-2585 is a ultra low outgassing potting and encapsulating silicone elastomer.

NuSil™ R-2615 is a optically clear potting and encapsulating silicone elastomer.

Ultra Low Outgassing SCV-2586 is a ultra low outgassing potting and encapsulating silicone elastomer.

LightSpan® LS-3252 is from LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical GelsComments: Low Viscosity and 1.52 RI, Index Matches BK7, GlassUse with Phosphor, Index matches to plastic such as COC.

NuSil™ CV1-2289-1 is a controlled volatility potting and encapsulating silicone elastomer.

Ultra Low Outgassing SCV-2590 is a ultra low outgassing clear silicone elastomer.

NuSil™ CV-2568 is a controlled volatility RTV silicone.

NuSil™ CV-2189-2 is a controlled volatility silicone glop-top.

NuSil™ MED-4286 is a ultra-soft low viscosity silicone elastomer.

NuSil™ R-1400 is a silicone glob-top.

NuSil™ CV-2510 is a controlled volatility RTV silicone.

NuSil™ CV10-2500 is a controlled volatility silicone. For applications requiring low outgassing and minimal volatile condensable under extreme operating conditions.

NuSil™ CV-2187 is a controlled volatility silicone elastomer.

LightSpan® LS-3440 is from LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical GelsComments: Very Soft, Penetration 9.0 mm, non-phenyl containing.

LightSpan® LS-3238 is from LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical GelsComments: Resistant to Hydrocarbon Solvents.

NuSil™ MED-6340 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil's restricted tacky gels can be used as temporary adhesives.Comments: LOW PENETRATION, LOW TACK GEL.

NuSil™ MED2-4220 is a fast cure low viscosity silicone elastomer.