Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Two-part, translucent silicone system
- Incorporates an adhesion promoter
- Low viscosity
- Convenient 1:1 mix ratio (Part A:B)
Applications & Uses
- Applications
- Application Area
- Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- As an embedding or potting compound for electronic assemblies and components to provide protection from extremes in humidity, radiation, thermal stress and mechanical stress
- Use to adhere covers onto housings or for any application where grooves and other configurations require a material with superior flow
- Instructions for Use
Mixing
Thoroughly mix in a convenient 1:1 mix ratio by weight prior to use.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a container rated for use and at least four times the volume of the material being deaerated. Hold vacuum until bulk deaeration is complete.
Inhibition Concerns
Cures in contact with most materials. Exceptions include butyl and chlorinated rubbers, some RTV silicones and unreacted residues of some curing agents. Note: Some bonding applications may require the use of a primer. NuSil Technology CF1-135 silicone primer is recommended.
Adjustable Cure
Schedule Product cures at a wide range of elevated temperatures and cure times to accommodate different production needs.
Properties
- Appearance
- Clear
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 2,600 (2,600 ) | cP (Mpa*s) | — |
| Lap Shear | 50 (0.34 ) | psi (MPa) | — |
| Durometer Type A | 30.0 | — | — |
| Elongat ion | 150.0 | % | — |
| Mix Rat io | 0.042361111 | — | — |
| Specific Gravity | 1.01 | — | — |
| Tensile | 425 (2.93 ) | psi (MPa) | — |
| Value | Units | Test Method / Conditions | |
| Cure System | Platinum | — | — |
| Cure at 100°C | 1.0 | hours | — |
Packaging & Availability
- Country Availability
- Regional Availability