Products

NuSil™ CF1-3510 is a engineering flourosilicone elastomer. Designed for protection of electrical components and assemblies against shock, vibration, moisture, dust, chEMIcals, and other environmental hazards.

LightSpan® LS2-6941 is a optically clear silicone elastomer.

NuSil™ CF2-4721 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Silicone ResinComment: 75 Type D, Precatalyzed.

NuSil™ R-2180-2 is a addition-cure high tear strength, silicone dispersion.

NuSil™ CV-2566 is a controlled volatility RTV silicone adhesive.

NuSil™ CV-2681-12 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Volume Resistivity, 125 ohm-cm, Lap Shear 70 psi (0.48 MPa).

NuSil™ EPM-2410 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Adhesives and SealantsComments: Ideal for Static Mix and Dispense Applications. Available in Black and White.

NuSil™ DDU-4630 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 30 days).NuSil offers a complete product line of silicone systems for use in drug delivery. Additionally, NuSil is capable of formulating, validating, manufacturing, testing and providing regulatory support for a custom product designed to achieve customer-defined, application-specific physical, mechanical and elution properties.Comments: HCR; Plasticity: 75 mil (1.9 mm).

Ultra Low Outgassing SCV-2585 is a ultra low outgassing potting and encapsulating silicone elastomer.

NuSil™ R-2615 is a optically clear potting and encapsulating silicone elastomer.

NuSil™ EPM-2493 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Thermal Interface Materials (TIMs)Comments: 1.0 W/m-K. BLT 25 µn, Al filled. Available as I Part.

NuSil™ CF1-3800 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings Comment: Thermally Conductive 1.25 W/m-K, Fuel Resistance.

NuSil™ CV15-2500 is a controlled volatility silicone elastomer.

NuSil™ CV-2510 is a controlled volatility RTV silicone.

NuSil™ EPM-2492 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Thermal Interface Materials (TIMs)Comments: 0.62 W/m-K, BLT 200 µn, BN filled.

NuSil™ EPM-2420 is a low volatility general purpose silicone adhesive.

NuSil™ EPM-2462 is a low volatility electrically conductive silicone elastomer.

NuSil™ CV2-2946 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.6 W/m-K, Thin Bond Line.

NuSil™ DDU-4330 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 30 days).NuSil offers a complete product line of silicone systems for use in drug delivery. Additionally, NuSil is capable of formulating, validating, manufacturing, testing and providing regulatory support for a custom product designed to achieve customer-defined, application-specific physical, mechanical and elution properties.Comments: Low Consistency Elastomer.

LightSpan® LS-6946 is a optical thermoset.

NuSil™ CF-4721 is thermosetting silicone resin. Forms a transparent, rigid material that retains its cured properties over a broad temperature range (up to 300°c/570°f). Has good dielectric properties at high temperatures and humidity.

NuSil™ EPM-2411-2 is a low volatility silicone glob-top.

NuSil™ R-2615-3 is a red potting and encapsulating silicone elastomer.

Ultra Low Outgassing SCV2-2599 is a controlled volatility (CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.64 W/m-K.

NuSil™ GEL-3500 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: GelComment: Fuel Resistant Gel, Durometer -Type '00' 50.

LightSpan® LS2-6140 is a optically clear primerless silicone encapsulant.

NuSil™ R-2200-11 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Mold MakingComment: Casting, Creating Molds.

NuSil™ FS-3781 is a fluorosilicone high consistency elastomer.

NuSil™ DDU-310 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 30 days).NuSil offers a complete product line of silicone systems for use in drug delivery. Additionally, NuSil is capable of formulating, validating, manufacturing, testing and providing regulatory support for a custom product designed to achieve customer-defined, application-specific physical, mechanical and elution properties.Comments: Fluid.

NuSil™ EPM-2482 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: GelsComments: Extreme Temperatures.

NuSil™ R-2631 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Static DissipativeComment: 50 ohm-cm , Low Durometer, Tough.

NuSil™ G-9340 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Thermal Interface Materials (TIMs)Comments: 230 mm Cone Penetration.

NuSil™ R-1082 is a RTV silicone coating.

NuSil™ R7-3521-11 is a fluorosilicone elastomer.

NuSil™ DDR-1370 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications (29 days or less) or for external applications.NuSil offers a complete product line of silicone systems for use in drug delivery. Additionally, NuSil is capable of formulating, validating, manufacturing, testing and providing regulatory support for a custom product designed to achieve customer-defined, application-specific physical, mechanical and elution properties.Comments: Pressure Sensitive Adhesive: Non Volatile Content: 65% Release Force: 11 ppi (1.9kN/m ) Blunt Probe Test: 1.5 lbs.

NuSil™ EPM-2421 is a low volatility silicone elastomer.