Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Two-part, low viscosity clear RTV silicone
- Designed for enhanced performance in extreme low and high temperatures
- 10:1 Mix Ratio (Part A:Part B)
Applications & Uses
- Applications
- Application Area
- Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- As an embedding or potting compound for environmental protection of electronic assemblies and components
- Provides protection from extremes in temperature, humidity, radiation, thermal stress and mechanical stress
- Low viscosity for applications requiring superior flow
- Instructions for Use
Mixing
Thoroughly mix Part A and Part B, in a 10:1 mix ratio by weight prior to use.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a container rated for use and at least four times the volume of the material being deaerated. Hold vacuum until bulk deaeration is complete.
Inhibition Concerns
Cures in contact with most materials, exceptions include: sulfurcured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues of some curing agents. Note: Some bonding applications may require the use of a primer. NuSil Technology CF1-135 silicone primer is recommended.
Adjustable Cure
Schedule Product cures at a wide range of cure times and temperatures to accommodate different production needs.
Properties
- Appearance
- Clear
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Viscosity | 5,300 (5,300 ) | cP (Mpa*s) | — |
Lap Shear | 200 (1.38 ) | psi (MPa) | — |
Durometer Type A | 40.0 | — | — |
Cte | 490.0 | ppm/°C | — |
Elongat ion | 100.0 | % | — |
Mix Rat io | 0.417361111 | — | — |
Refractive Index | 1.43 | — | — |
Specific Gravity | 1.04 | — | — |
Tensile | 650 (4.48 ) | psi (MPa) | — |
Work Time | 2.0 | hours | — |
Value | Units | Test Method / Conditions | |
Cure System | Platinum | — | — |
Cure at 65 °C | 4.0 | hours | — |
Packaging & Availability
- Country Availability
- Regional Availability