Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- Two-part, black, static dissipative silicone
- Offers low modulus
- 1:1 Mix Ratio (Part A: Part B)
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Applications
- For applications requiring low volatility
- Use for static dissipation in electronic components
- Use for any application where grooves and other configurations require a non-flowing to limited flow material
- Instructions for Use
Mixing
Thoroughly mix in a 1:1 (Part A: Part B) ratio just prior to use.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a suitable container of at least four times the volume of material being de-aired. Hold vacuum until bulk deaeration is complete.
Note: Some bonding application may require the use of a primer. NuSil Technology’s CF1-135 silicone primer is recommended.
Substrate Considerations
Cures in contact with most materials, exceptions include: sulfurcured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues of some curing agents.
Adjustable Cure
Schedule Product cures at a wide range of cure times and temperatures to accommodate different production needs.
Properties
- Appearance
- Black
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 675,000 (675,000 ) | cP (Mpa*s) | — |
| Lap Shear | 325 (2.24 ) | psi (MPa) | — |
| Durometer Type A | 30.0 | — | — |
| Elongat ion | 350.0 | % | — |
| Ionic Content Cl | max. 5 | ppm | — |
| Ionic Content K | max. 1 | ppm | — |
| Ionic Content Na | max. 6 | ppm | — |
| Mix Rat io | 0.042361111 | — | — |
| Specific Gravity | 1.05 | — | — |
| Tear | 30 (5.29 ) | ppi (kN/m) | — |
| Tensile | 500 (3.45 ) | psi (MPa) | — |
| Thermal Conductivity | 0.22 | W/(mK) | — |
| Volume Resistivity | 535.0 | ohmcm | — |
| Work Time | 1.0 | minutes | — |
| Value | Units | Test Method / Conditions | |
| Cure System | Platinum | — | — |
| Cure at RTV | 24.0 | hours | — |
Packaging & Availability
- Country Availability
- Regional Availability