company tower banner
NuSil Technology Company Logo

NuSil™ MED-6215

1 of 565 products in this brand
NuSil™ MED-6215 is a optically clear low viscosity silicone elastomer.

Chemical Family: Silicones

Product Type: Coating, Encapsulant, Potting Compound

Cure Method: Heat Cure

Application Area: Medical Applications

Application Method: Dip Coating

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Features & Benefits

Labeling Claims
Ready-to-Use Product Features
Product Highlights
  • Two-part, optically clear, solvent free, low viscosity silicone elastomer
  • Cures with heat via addition-cure chemistry
  • 10:1 Mix Ratio (Part A: Part B)

Applications & Uses

Application Area
Application Method
Cure Method
Plastics & Elastomers End Uses
Applications
  • For use in potting, encapsulating, coating, and injection or transfer molding applications
  • Use in the casting of clear silicone parts
  • Use as a coating, by means of dipping or painting.
Instructions for Use

Mixing

Combine Part A and Part B in a 1:1 mix ratio prior to use. Airless mixing, metering or dispensing equipment is recommended for production operations. If mixing by hand, take care to minimize air entrapment.

Vacuum Deaeration

Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a suitable container of at least four times the volume of material being de-aired. Hold vacuum until bulk deaeration is complete.

Cure Inhibition

Curing may be inhibited by traces of amines, sulfur, nitrogen oxide, organotin compounds, and carbon monoxide. Because organic rubbers often contain these substances, they should not come in contact with the uncured elastomer. Catalyst residues from silicone RTV elastomers and peroxide-cured silicone elastomers may also inhibit the cure.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Durometer Type A50.0
Viscosity3,800 (3,800 )cP (Mpa*s)
Work Time5.0hours
Tensile1,250 (8.62 )psi (MPa)
Elongat ion100.0%
Mix Rat io0.417361111
Specific Gravity1.03
Tack Free Time16.0hours
Cured Properties
ValueUnitsTest Method / Conditions
Cure at 150 °C15.0minutes
Cure SystemPlatinum

Packaging & Availability

Regional Availability
  • Asia Pacific
  • Europe
  • Latin America
  • North America