Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- One-part, 100 mol % fluorosilicone, RTV elastomer dispersed in Tert-Butyl Acetate
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Plastics & Elastomers End Uses
- Applications
- For dip casting of thin elastomeric films
- For sealing and bonding applications
- For applications requiring resistance (low swell/low permeation) to many solvents and oils including dimethyl silicone oils
- Instructions for Use
Mixing
Thoroughly mix just prior to use. Accomplish additional dilution for thin film applications by adding appropriate solvent, followed by mixing and deaering. Exercise care to prevent solvent loss during dearing.
Warning: Consult the MSDS for MED-6655 prior to use as the solvent carrier is hazardous.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a container rated for use and at least four times the volume of material being deaerated. Hold vacuum until bulk deaeration is complete.
Properties
- Physical Form
- Appearance
- White
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 700 (700 ) | cP (Mpa*s) | — |
| Non Volat ile Content | 60.0 | % | — |
| Durometer Type A | 35.0 | — | — |
| Elongat ion | 425.0 | % | — |
| Mix Rat io | 1 PART | — | — |
| Rheology | Flowable / Self Leveling | — | — |
| Tack Free Time | 80.0 | minutes | — |
| Tear | 45 (7.94 ) | ppi (kN/m) | — |
| Tensile | 775 (5.34 ) | psi (MPa) | — |
| Value | Units | Test Method / Conditions | |
| Cure System | Acetoxy | — | — |
| Cure at RTV | 3.0 | days | — |
| Cure Type | RTV | — | — |
Packaging & Availability
- Country Availability
- Regional Availability