Products

NuSil™ NuSil™ MED-1137 is a RTV silicone adhesive.

NuSil™ MED1-4013 is a fast-cure silicone adhesive.

NuSil™ NuSil™ MED-1511 is a RTV silicone adhesive.

NuSil™ NuSil™ MED-1037 is a RTV silicone adhesive.

NuSil™ MED3-4213 is a fast-cure silicone adhesive.

NuSil™ MED-6607 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days)."Dispersion" is a term used to describe a silicone elastomer system that is suspended or dispersed in a solvent carrier. It is a complex solution that contains silicone polymers of various molecular weights and reinforcing fi llers. The substituent groups comprising the polymer back bone structure may consist of the following: Polydimethylsiloxane, Dimethyl Diphenyl copolymer, and Fluoro homo polymer or copolymer. Silicone dispersions typically have low viscosities, which is benefi cial for applications wherein a thin fi lm coating is needed, and they can easily be used in dipping and spraying processes. NuSil uses a variety of solvents to disperse silicones, such as xylene, tert butyl acetate, heptane, hexane, acetone and naphtha.Comments: ONE PART, IN NAPHTHA.

NuSil™ MED2-4213 is a fast-cure silicone adhesive.

NuSil™ MED10-6607 is a RTV silicone dispersion.

NuSil™ MED2-4013 is a fast-cure silicone adhesive.

NuSil™ NuSil™ MED-2000 is a RTV silicone adhesive.

NuSil™ MED-2174 is a high consistency silicone elastomer.

NuSil™ NuSil™ MED-1131 is a RTV silicone adhesive.

NuSil™ MED1-6604 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days)."Dispersion" is a term used to describe a silicone elastomer system that is suspended or dispersed in a solvent carrier. It is a complex solution that contains silicone polymers of various molecular weights and reinforcing fi llers. The substituent groups comprising the polymer back bone structure may consist of the following: Polydimethylsiloxane, Dimethyl Diphenyl copolymer, and Fluoro homo polymer or copolymer. Silicone dispersions typically have low viscosities, which is benefi cial for applications wherein a thin fi lm coating is needed, and they can easily be used in dipping and spraying processes. NuSil uses a variety of solvents to disperse silicones, such as xylene, tert butyl acetate, heptane, hexane, acetone and naphtha.Comments: ONE PART, SMOOTH FINISH IN THF.

NuSil™ MED-6381 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices.Comments: FIRM RTV GEL.

NuSil™ MED-1055 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Silicone adhesives are elastomers or pressure sensitive adhesive systems that are designed to bond silicone surfaces to each other and to other substrate surfaces such as metals and plastics. There are one-part and two-part adhesives, ranging in consistency from flowable to non-flowable (non-slump).In general, silicone adhesives adhere well to substrates such as glass, aluminum, titanium, other silicones, and some ceramics. While various types of materials can be used as adhesives, silicones are consistently chosen for their many inherent properties and overall versatility.Comments: RTV, FLUOROSILICONE SEALANT.

NuSil™ NuSil™ MED-1000 is a RTV silicone adhesive.

NuSil™ MED-6345 is a soft silicone adhesive.

NuSil™ MED6-6606 is a RTV silicone dispersion.

NuSil™ MED1-4213 is a fast-cure silicone adhesive.

NuSil™ MED10-6670 is a low coefficient of friction silicone coating.

NuSil™ NuSil™ MED-1040 is a RTV silicone adhesive.

NuSil™ MED10-6605 is a RTV cure silicone dispersion.

NuSil™ MED-6350 is a soft silicone adhesive.

NuSil™ MED16-6606 is a RTV silicone dispersion.

NuSil™ MED-6655 is a RTV fluorosilicone dispersion.

NuSil™ MED1-1356 is a pressure sensitive silicone adhesive.

NuSil™ GEL1-8155 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: GelsComments: Firm gel, Penetration 0.4 mm, Longer Work Time.

NuSil™ NuSil™ MED-1011 is a RTV silicone adhesive.

NuSil™ MED-6382 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.Comments: FAST CURE, OPAQUE.

NuSil™ MED-2014 is a silicone dispersion.

NuSil™ NuSil™ MED-1540 is a RTV silicone adhesive.

NuSil™ MED12-6381 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil's restricted tacky gels can be used as temporary adhesives.Comments: FIRM RTV GEL.

NuSil™ MED-2214 is a silicone dispersion.

NuSil™ MED11-6604 is a RTV silicone dispersion.

NuSil™ NuSil™ MED-1031 is a RTV silicone adhesive.

NuSil™ MED-2245 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).High consistency rubber, or HCR, consists of high molecular weight polymer combined with silica to produce a material that can be molded, extruded, or calendared into a useful end product. An HCR has the consistency of clay and is primarily formulated in a one or two part system (peroxide and platinum catalysts, respectively).Most platinum cure high consistency rubbers are two component systems with an easy-to-work-with 1:1 mix ratio.Comments: MIX RATIO (A) 100: (B) 0.7: (C) 0.16.