Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- CAS No.
- 141-78-6
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- One-part, non-curing, pressure sensitive adhesive
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Plastics & Elastomers End Uses
- Applications
- Well suited for use as an adhesive for bonding and sealing silicone materials
- For applications requiring the bonding of silicone to metals, urethanes and various other substrates
- Non-irritating to skin
- Use for medical tapes and fasteners, external incontinence devices, transdermal skin patches, hair replacement adhesives, and special effect adhesives
- Instructions for Use
Surface Preparation
Thoroughly clean surfaces being bonded or built-up with silicone adhesive using a non-oily cleaner or mild soap to remove any surface contaminants. Do not use synthetic detergents or oil-based soaps, as they may be absorbed and subsequently leach out. Rinse first with hot water, followed by a thorough rinse using distilled water. Use compatible degreasers to clean metal surfaces.
Bonding Applications
Spread a layer of silicone adhesive on one of the surfaces. Squeeze both surfaces together to bond. Apply sufficient pressure to ensure full contact without forcing the silicone adhesive from between the pieces.
Properties
- Appearance
- Translucent
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Peel Strength | 14.3 (2.5) | lbf/in kN/m | — |
| Viscosity | 245 (245 ) | cP (Mpa*s) | — |
| Non Volat ile Content | 50.0 | % | — |
| Solvent | Ethyl Acetate | — | — |
| Tack | 2.3 (0.02 ) | psi (MPa) | — |
| Value | Units | Test Method / Conditions | |
| Cure at 150 °C | 90.0 | minutes | — |
Packaging & Availability
- Country Availability
- Regional Availability