Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- One-part RTV silicone elastomer dispersed in xylene
Applications & Uses
- Markets
- Applications
- Designed for spraying, dip casting, and room temperature curing of thin, elastomeric films
- Instructions for Use
Mixing
Thoroughly mix just prior to further solvent addition. Exercise care to prevent solvent loss during dearing. Accomplish additional dilution for thin film applications by adding appropriate solvent, followed by mixing and deaering.
Warning: Consult the MSDS for R-1082 prior to use as the solvent carrier is hazardous.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a container rated for use and at least four times the volume of material being deaerated. Hold vacuum until bulk deaeration is complete.
Properties
- Appearance
- Translucent
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Viscosity | 700 (700 ) | cP (Mpa*s) | — |
Non Volat ile Content | 29.0 | % | — |
Durometer Type A | 25.0 | — | — |
Elongat ion | 950.0 | % | — |
Refractive Index | 1.41 | — | — |
Specific Gravity | 1.09 | — | — |
Stress at Strain 300 % | 160 (1.1) | psi (MPa) | — |
Tear | 125 (22.05 ) | ppi (kN/m) | — |
Tensile | 1,425 (9.83 ) | psi (MPa) | — |
Value | Units | Test Method / Conditions | |
Cure at RTV | 5.0 | days | — |
Cure System | Acetoxy | — | — |
Packaging & Availability
- Country Availability
- Regional Availability