Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Two Part, Transparent, 1:1 Mix ratio (A:B)
- Low volatility and high purity
- High tensile strength, low viscosity
- REACh and RoHS compliant
- Tested per UL-94 and passed V-0
- Requires heat to cure
Applications & Uses
- Applications
- Application Area
- Cure Method
- Applications
- Designed for optically harsh environments such as High Power LED and UV LED packages
- Adheres to ceramic, PPA and aluminum without a primer (See Appendix 1)
- Has excellent thermal stability (See Appendix 1)
- Protects electrical components and assemblies against shock, vibration, moisture, dust, chemicals, and other environmental hazards
- Instructions for Use
Mixing and Vacuum Deaeration
Combine Part A and Part B in a 1:1 mix ratio prior to use. Airless mixing, metering or dispensing equipment is recommended for production operations. If mixing by hand, take care to minimize air entrapment. Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a suitable container of at least four times the volume of material being de-aired. Hold vacuum until bulk deaeration is complete.
Substrate Considerations
LS2-6140 cures in contact with most materials common to electronic assembles. Exceptions include butyl and chlorinated rubbers, some Tin condensation cure silicones and unreacted residues of some curing agents. Units being encapsulated or potted should be clean and free of surface contaminates. Containers and dispensers being used should also be clean and dry. Cure inhibition can usually be prevented by washing all containers with solvent or volatizing the contaminant by heating.
Use By Date
LS2-6140 has a use by date of 6 months from the date of manufacture when stored below 40°C in original, unopened containers.
Properties
- Color
- Flame Rating
- Appearance
- Clear
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 2,740 (2,740 ) | cP (Mpa*s) | — |
| Durometer Type A | 50.0 | — | — |
| Tensile | 1,130 (7.79 ) | psi (MPa) | — |
| Elongat ion | 150.0 | % | — |
| Cte | 330.0 | ppm/°C | — |
| Ionic Content Cl | max. 2.5 | ppm | — |
| Ionic Content K | max. 2.5 | ppm | — |
| Ionic Content Na | max. 5 | ppm | — |
| Lap Shear | 477 (3.29 ) | psi (MPa) | — |
| Mix Rat io | 0.042361111 | — | — |
| Refractive Index | 1.41 | — | — |
| Specific Gravity | 1.03 | — | — |
| Volat ile Content | 1.0 | % | — |
| Volume Resistivity | 1.10E+15 | ohmcm | — |
| Value | Units | Test Method / Conditions | |
| Cure System | Platinum | — | — |
| Cure at 150 °C | 60.0 | minutes | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 6 Months