Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features of ABS Sheet
- Temperature: -40°C up to +105°C.
- Self-lubricating and electrically insulating.
- Improved resistance to fatigue and wear resistance than standard Nylon 6 grades.
- Enhanced mechanical strength, hardness and toughness.
- Improved temperature resistance compared to extruded Nylon 6 MoS2.
- Highly machinable.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
Rollers & wheels, gears, friction strips, bushes, spindle nuts, piston guides, castors, impact plates, friction bearings, conveyor screws, cam disks, rope pulleys, plug parts, damping plates, bearings.
Properties
- Color
- Flame Rating
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Strength (Sample Type 1B, 50mm min^-1) | 85 (12328) | MPa / psi | ISO 527-1/2:1993 |
| E-modulus (Sample Type 1B, 50mm min^-1) | 4100 (594656) | MPa (psi) | ISO 527-1/2:1993 |
| Elongation at Break (Sample Type 1B, 50mm min^-1) | min. 20 | % | ISO 527-1/2:1993 |
| Compressive Strength (Sample Type B, 5mm min^-1) | 105 (15229) | MPa (psi) | ISO 604:2002 |
| Compressive Modulus (Sample Type A, 1mm min^-1) | 3000 (435114) | MPa (psi) | ISO 604:2002 |
| Flexural Strength (1.5mm min^-1) | 115 / 16679 | MPa (psi) | ISO 178:2001 |
| Flexural Modulus (1.5mm min^-1) | 3700 / 536641 | MPa (psi) | ISO 178:2001 |
| Izod Impact Strength (Sample Type A (Notched)) | 4.50 (2.14) | KJ/m2 ( ft.lb/in2 ) | ISO 180:2000 |
| Hardness | 85 | Shore D | ISO 868:2003 |
| Coefficient of Friction (Dynamic,31.4m/min, 1.75MPa) | 0.25 | - | - |
| Value | Units | Test Method / Conditions | |
| Density | 1.150 (0.042) | g/cm3 (lb/inch3) | ISO1183:1987 |
| Water Absorption (24 hours, Immersion 23°C) | 0.2 | % | ISO 62:1999 (modified) |
| Water Absorption (Saturation,Immersion 23°C) | 6 | % | ISO 62:1999 |
| Value | Units | Test Method / Conditions | |
| Melting Temperature | 220 (428) | °C (°F) | - |
| Heat Deflection Temp. HDT/A (1.80MPa) | 210 / 410 | °C / °F | ISO 75 |
| Heat Deflection Temp. HDT/B (0.45MPa) | 220 / 428 | °C / °F | ISO 75 |
| Max. Intermittent Service Temp | 170 (338) | °C (°F) | - |
| Max. Continuous Service Temp (5000hrs) | 105 (221) | °C (°F) | - |
| Min. Intermittent Service Temp. | -100 (-148) | °C (°F) | - |
| Min. Continuous Service Temp. | -40 (-40) | °C (°F) | - |
| Coefficient of Linear Thermal Expansion (TMA,23°C to 55°C) | 8x10^-5 (4.44x10^-5) | °C-1 (°F-1) | ISO 11359-2:1999 |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant (1MHz) | 3.7 | - | IEC 60250:1969-01 |
| Dielectric Constant (Low Frequency,100Hz) | 4 | - | - |
| Dielectric Strength | 25 (635) | kV/mm (Kv/in) | IEC 60243-1:1998-01 |
| Volume Resistivity | 1x10^13 (3.93x10^14) | ohm.m (ohm.in) | IEC 60093:1980-01 |
| Surface Resistivity ROA | 1x10^12 | ohm | IEC 60093:1980-01 |
| Comparative Tracking Index | 600 | CTI | IEC 60112:2003-01 |
| Value | Units | Test Method / Conditions | |
| Flammability | HB | - | IEC 60695-11-10:2003-08 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Availability
Sheet Size (mm) Sheet Thickness (mm) - 8 10 12 15 16 20 25 30 35 40 45 2000 x 1000 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 2000 x 1200 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 1220 x 610 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Sheet Size (mm) Sheet Thickness (mm) - 50 55 60 65 70 75 80 85 90 95 100 2000 x 1000 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 2000 x 1200 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 1220 x 610 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes denotes available
No denotes unavailable