Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features of ABS Sheet
- Temperature: -40°C up to +100°C.
- High strength and stiffness.
- Good impact and wear resistance.
- Good sliding properties and resistance to abrasion.
- Good resistance to chemicals and oils.
- Easily machined.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
Impact plates, rollers, spindle nuts, conveyor screws, bushes, piston guides, castors, damping plates, gears, rope pulleys, cam disks, friction strips, plug parts and bearings.
Properties
- Color
- Flame Rating
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Strength (Sample Type 1B, 50mm min^-1) | 80 (11603) | MPa / psi | ISO 527-1/2:1993 |
| E-modulus (Sample Type 1B, 50mm min^-1) | 4000 (580152) | MPa (psi) | ISO 527-1/2:1993 |
| Elongation at Break (Sample Type 1B, 50mm min^-1) | min. 20 | % | ISO 527-1/2:1993 |
| Compressive Strength (Sample Type B, 5mm min-) | 95 (13779) | MPa (psi) | ISO 604:2002 |
| Compressive Modulus (Sample Type A, 1mm min^-1) | 2700 (391603) | MPa (psi) | ISO 604:2002 |
| Flexural Strength (1.5mm min^-1) | 105 / 15229 | MPa (psi) | ISO 178:2001 |
| Flexural Modulus (1.5mm min^-1) | 3300 / 478626 | MPa (psi) | ISO 178:2001 |
| Izod Impact Strength (Sample Type A (Notched)) | 5.60 (2.66) | KJ/m2 ( ft.lb/in2 ) | ISO 180:2000 |
| Hardness | 84 | Shore D | ISO 868:2003 |
| Coefficient of Friction (Dynamic, 31.4m/min, 1.75MPa) | 0.39 | - | - |
| Wear Rate (31.4m/min, 1.75MPa) | 0.44 | mg/km | - |
| K-Factor (31.4m/min, 1.75MPa) | 5.0x10^-6 (2.4x10^-9) | mm3/Nm ( in3.min./ft.lb.hr ) | - |
| Value | Units | Test Method / Conditions | |
| Density | 1.145 (0.041) | g/cm3 (lb/inch3) | ISO1183:1987 |
| Water Absorption (24 hours, Immersion, 23°C) | 0.3 | % | ISO 62:1999 (modified) |
| Water Absorption (Saturation, Immersion, 23°C) | 7 | % | ISO 62:1999 |
| Value | Units | Test Method / Conditions | |
| Melting Temperature | 220 (428) | °C (°F) | - |
| Max. Intermittent Service Temp | 170 (338) | °C (°F) | - |
| Max. Continuous Service Temp (5000hrs) | 100 (212) | °C (°F) | - |
| Min. Intermittent Service Temp. | -100 (-148) | °C (°F) | - |
| Min. Continuous Service Temp. | -40 (-40) | °C (°F) | - |
| Coefficient of Linear Thermal Expansion (TMA,23°C to 55°C) | 8x10^-5 (4.44x10^-5) | °C-1 (°F-1) | ISO 11359-2:1999 |
| Thermal Conductivity (Mean T = 20°C) | 0.26 (0.15) | W/m.°C (BTU in/ft.hr.°F) | ISO 8301:1991 |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant (1MHz) | 3.7 | - | IEC 60250:1969-01 |
| Dielectric Constant (Low Frequency,100Hz) | 4 | - | - |
| Dielectric Strength | 25 (635) | kV/mm (Kv/in) | IEC 60243-1:1998-01 |
| Volume Resistivity | 1x10^13 (3.93x10^14) | ohm.m (ohm.in) | IEC 60093:1980-01 |
| Surface Resistivity ROA | 1x10^12 | ohm | IEC 60093:1980-01 |
| Comparative Tracking Index | 600 | CTI | IEC 60112:2003-01 |
| Value | Units | Test Method / Conditions | |
| Flammability | HB | - | IEC 60695-11-10:2003-08 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Availability
Sheet Size (mm) Sheet Thickness (mm) - 8 10 12 15 16 20 25 30 35 40 45 2000 x 1000 yes yes yes yes yes yes yes yes yes yes yes 2000 x 1200 yes yes yes yes yes yes yes yes yes yes yes 1220 x 610 yes yes yes yes yes yes yes yes yes yes yes 1000 x 1000 No yes yes yes No yes yes yes yes yes yes Sheet Size (mm) Sheet Thickness (mm) - 50 55 60 65 70 75 80 85 90 95 100 120 2000 x 1000 yes yes yes yes yes yes yes yes yes yes yes No 2000 x 1200 yes yes yes yes yes yes yes yes yes No yes No 1220 x 610 yes yes yes yes yes yes yes yes yes yes yes No 1000 x 1000 yes No yes No yes No yes No No No No Yes Yes denotes available
No denotes unavailable