Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features of ABS Sheet
- Temperature: -40°C up to +85°C (+160°C short term).
- Combines high strength and stiffness with good wear resistance properties.
- Good electrical insulation properties.
- Good resistance to chemicals and oils.
- Easily machined.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
Rollers, gears, guides, conveyor screws, impact plates, scrapers, friction strips, bushes, spindle nuts, castors, bearings, cam disks, rope pulleys, damping plates.
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
Value | Units | Test Method / Conditions | |
Tensile Strength (Sample Type 1B, 50mm min^-1) | 85 (12328) | MPa / psi | ISO 527-1/2:1993 |
E-modulus | 4100 (594656) | MPa (psi) | ISO 527-1/2:1993 |
Elongation at Break (Sample Type 1B, 50mm min^-1) | min. 20 | % | ISO 527-1/2:1993 |
Compressive Strength (Sample Type B, 5mm min^-1) | 105 (15229) | MPa (psi) | ISO 604:2002 |
Compressive Modulus (Sample Type A, 1mm min^-1) | 3000 (435114) | MPa (psi) | ISO 604:2002 |
Flexural Strength (1.5mm min^-1) | 115 / 16679 | MPa (psi) | ISO 178:2001 |
Flexural Modulus (1.5mm min^-1) | 3700 / 536641 | MPa (psi) | ISO 178:2001 |
Izod Impact Strength (Sample Type A (Notched)) | 4.50 (2.14) | KJ/m2 ( ft.lb/in2 ) | ISO 180:2000 |
Hardness | 85 | Shore D | ISO 868:2003 |
Coefficient of Friction (Dynamic,31.4m/min, 1.75MPa) | 0.25 | — | — |
Value | Units | Test Method / Conditions | |
Density | 1.150 (0.042) | g/cm3 (lb/inch3) | ISO1183:1987 |
Water Absorption (24 hours,Immersion, 23°C) | 0.2 | % | ISO 62:1999 (modified) |
Water Absorption (Saturation, Immersion, 23°C) | 6 | % | ISO 62:1999 |
Value | Units | Test Method / Conditions | |
Melting Temperature | 220 (428) | °C (°F) | — |
Heat Deflection Temp. HDT/A (1.80MPa) | 210 / 410 | °C / °F | ISO 75 |
Heat Deflection Temp. HDT/B (0.45MPa) | 220 / 428 | °C / °F | ISO 75 |
Max. Intermittent Service Temp | 170 (338) | °C (°F) | — |
Max. Continuous Service Temp (5000hrs) | 105 (221) | °C (°F) | — |
Min. Intermittent Service Temp. | -100 (-148) | °C (°F) | — |
Min. Continuous Service Temp. | -40 (-40) | °C (°F) | — |
Coefficient of Linear Thermal Expansion (TMA,23°C to 55°C) | 8x10^-5 (4.44x10^-5) | °C-1 (°F-1) | ISO 11359-2:1999 |
Value | Units | Test Method / Conditions | |
Dielectric Constant (1MHz) | 3.7 | — | IEC 60250:1969-01 |
Dielectric Constant (Low Frequency,100Hz) | 4 | — | — |
Dielectric Strength | 25 (635) | kV/mm (Kv/in) | IEC 60243-1:1998-01 |
Volume Resistivity | 1x10^13 (3.93x10^14) | ohm.m (ohm.in) | IEC 60093:1980-01 |
Surface Resistivity ROA | 1x10^12 | ohm | IEC 60093:1980-01 |
Comparative Tracking Index | 600 | CTI | IEC 60112:2003-01 |
Value | Units | Test Method / Conditions | |
Flammability | HB | — | IEC 60695-11-10:2003-08 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Availability
Color Sheet Size (mm) Sheet Thickness (mm) - 0.5 0.8 1 1.2 1.5 2 3 4 5 6 8 10 12 Natural 1000 x 610 No No No No No No No No No No Yes Yes Yes Black 1000 x 610 No No No No No No No No No No Yes Yes Yes Natural 3000 x 610 No No No No No No No No No No Yes Yes Yes Black 3000 x 610 No No No No No No No No No No Yes Yes Yes Natural 2000 x 1000 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No Black 2000 x 1000 No No Yes NO NO Yes Yes Yes Yes Yes No No No Color Sheet Size (mm) Sheet Thickness (mm) - 15 16 20 25 30 35 40 50 60 70 80 100 Natural 1000 x 610 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Black 1000 x 610 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Natural 3000 x 610 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Black 3000 x 610 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes denotes available
No denotes unavailable