Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Key Features of ABS Sheet
- Temperature: Up to -10°C up to +250°C.
- High dimensional stability for high precision components.
- Enhanced impact / stiffness ratio.
- Extremely good wear resistance properties.
- Contains additives that are identifiable in metal detector scanning equipment.
- Also detectable by X-ray equipment.
- Excellent resistance to chemicals, steam and hydrolysis.
- Food approved.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
Filling pistons, bushings, thrust washers, scrapers and manifolds in high temperature situations in the food, drink and pharmaceutical industry.
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 92 | MPa | ISO 527-1/-2 (7) |
| Tensile Strain (Elongation) at Yield | 5 | % | ISO 527-1/-2 (7) |
| Tensile Strain (Elongation) at Break | 6 | % | ISO 527-1/-2 (7) |
| Tensile Modulus of Elasticity | 4000 | MPa | ISO 527-1/-2 (9) |
| Shear Strength | 10706 | PSI | ASTM D732 |
| Compressive Stress at 1 / 2 / 5 % Nominal Strain | 39 / 74 / 127 | MPa | ISO 604 (10) |
| Compressive Strength | 20198 | PSI | ASTM D696 (11) |
| Charpy Impact Strength - Unnotched | 28 | kJ/m2 | ISO 179-1/1eU |
| Charpy Impact Strength - Notched | 3.3 | kJ/m2 | ISO 179-1/1eA |
| Izod Impact Notched | 0.6 | ft.lb./in | ASTM D256 |
| Flexural Strength | 21590 | PSI | ASTM D790 (13) |
| Flexural Modulus of Elasticity | 627 | KSI | ASTM D790 |
| Rockwell M Hardness (14) | 98 | - | ISO 2039-2 |
| Value | Units | Test Method / Conditions | |
| Density | 1.46 | g/cm3 | ISO 1183-1 |
| Specific Gravity | 1.47 | g/cm³ | ASTM D792 |
| Wear Rate | 3.2 | μm/km | ISO 7148-2 (18) |
| Dynamic Coefficient of Friction | 0.30 - 0.60 | - | ISO 7148-2 (18) |
| Value | Units | Test Method / Conditions | |
| Melting Temperature (DSC, 10°C (50°F) / min) | 340 | °C | ISO 11357-1/-3 |
| Coefficient of Linear Thermal Expansion (23 to 60°C) (73 to 140°F) | 49 | μm/(m.K) | - |
| Coefficient of Linear Thermal Expansion (23 to 100°C) (73 to 210°F) | 54 | μm/(m.K) | - |
| Heat Deflection Temperature | 185 | °C | ISO 75-1/-2 |
| Continuous Allowable Service Temperature in Air (20,000 hours) (3) | 250 | °C | - |
| Min. Service Temperature (4) | -10 | °C | - |
| Value | Units | Test Method / Conditions | |
| Flammability (3mm (1/8 in.)) (5) | V-0 | - | UL 94 |
Regulatory & Compliance
- Certifications & Compliance