Products

Park’s Easycure E-710™ is a modified epoxy system with a low cure temperature of 160-250°F (70-120°C). Easycure E-710™ provides very good mechanical properties with medium toughness and long out time at room temperature.

Park’s E-752-MTS is a toughened; 350°F cure epoxy system designed with improved mechanical properties and damage tolerance that is suitable for primary aircraft structures. Consistent with the E-752 family of epoxies, the E-752-MTS allows flexible and robust processing in Autoclave, Out of Autoclave and Press cures. It exhibits improved toughness and impact strength while maintaining good tack and drapeability for ease of layup.

Park’s F-502 is a MIL-R-9299 phenolic resin system suitable for impregnation on any MIL-C-9084 fabric with a compatible finish. F-502 is used in the manufacture of ablative reinforcements in rocket nozzles, as well as ducting and secondary structures.

Park’s E-770 is a 350°F (176°C) curing, flame resistant modified epoxy system for 200°F (93°C) service and meets the requirements of Mil R-9300-B, Type I. It has excellent green strength developing properties quickly and doesn’t need a post cure to maintain its 200°F (93°C) properties.

Park’s E-752 is a toughened, 365°F cure epoxy system designed for demanding structural applications up to 265°F/wet. E-752 offers a good balance of toughness, high service temperature and good moisture resistance, as well as excellent tack and drape. Formulated for both oven and autoclave cure, E-752 provides for easy processing with oven cure, without sacrificing mechanical properties.

Park’s E‐720 is a modified epoxy resin system designed toexposure to high temperature. E‐720 has a proven history inmany demanding aerospace applications.

Park’s E-761 is a versatile self-adhesive epoxy matrix for use in aerospace and commercial applications where ease of processing and cost are key considerations.

Park’s E-766B is a low tack, self adhesive epoxy resin system designed for honeycomb applications. E-766B displays excellent peel properties.

Park’s E-752-LT is a toughened; 350°F (177°C) cure epoxy resin system with 315°F (157°C) wet Tg for primary and secondary structural applications. E-752-LT is formulated for efficient processing in high volume Automated Fiber Placement (AFP) applications manufacturing. The resin system offers a combination of toughness, low moisture uptake and good mechanical properties. E-752-LT is formulated to laminate In Autoclave (AC), Out of Autoclave (OOA) and Press cure conditions.

Park’s E-746 is a modified epoxy resin system designed to retain excellent mechanical properties after extended exposure to high temperature. E-746 has a proven history in many demanding aerospace applications.

Park’s F-552 is a high purity silica filled phenolic resin coated on high strength grade silica fabric. F-552 is used in the manufacture of intermediate temperature ablative rocket nozzles, heat shields, and combustion chambers in highly oxidative environments.

Park’s E-763 is a modified epoxy system with a nominal 250°F cure temperature. E-763 provides a transparent resin surface on the finished part which gives finished part surfaces a cosmetically attractive finish.

Aeroglide® is an epoxy-based composite surfacing film which can be oven or autoclave cured at either 250°F/120°C or 350°F/180°C to eliminate surface porosity for composite parts.

Electroglide® is an epoxy-based composite surfacing film with embedded metal mesh that is designed to protect aircraft composite parts from lightning strikes.

Park’s E-722 is a modified 350°F cure epoxy system with excellent processing characteristics for vacuum bag, press, and autoclave molding.

Park’s E-718 is a modified epoxy resin system. E-718 is designed to provide excellent mechanical properties at low cure pressures.

Park’s E-765 is a toughened 270°F cure epoxy prepreg system designed to replace 350°F cure systems in many aircraft structural applications. Park’s E-765-3K-PW, -6K-5HS and 7781 materials are AGATE approved. FAA-approved, B-Basis design allowable databases for AGATE materials are available upon request. Park has also developed AGATE approved material and process specifications which are also available upon request.