Products

ASAFAMA is a highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. In addition to the benefits listed, ASAFAMA will also enhance the application defoaming properties of your coating.

APACA is a modified dimethyl polysiloxane co-polymer solution. It will help in reducing surface defects by altering the surface tension of the coating and for use in water-borne and water-reducible products.

ASAFA is a unique blend of a dimethyl silicone and refined naphthenic base oil blend. Designed for use in conventional systems: acrylic resins, alkyds, polyamide, polyester and urethane.

RAMA is a recoatable, carefully calculated blend of Alkyl-Aryl modified silicones designed to improve mar resistance without the standard recoat problems of common silicones. Manufactured for use in virtually all solvent-borne systems.

WBWADA-60 is a unique blend of a functional capped amine with tall oil fatty acid. The resulting product is a triangular shaped wetting agent with high efficiency toward alkaline based pigments. The key to the utilization is to maintain maximum mobility of the grind paste during initial incorporation of pigment. Resin-free grinds should utilize some co-solvent if possible to improve dispersion quality. Grinding in non-neutralized resin and co-solvent at the lowest resin solids as possible, provides the most suitable grinding medium. Continue to add pigment until viscosity reaches 100-135 KU at 100-130°F. Stabilization with neturalized resin after achieving the grind specification will help to avoid pigment shocking. The order of pigment addition should be primary colors and high oil absorption pigments followed by extenders and rheology modifiers. Systems include: Solution acrylics, polyesters, alkyds and epoxies.

SA #1 is a proprietary silicone blend designed for use in high solids coatings. Its primary function is to improve flow and leveling during application. Systems include virtually all high solids resins.

CHEM-REZ A-1050 is a poly vinyl ethyl isoburyl ether solution at 50% solids in 150 Solvent. Recommended for use in virtually all conventional and high solid coating systems..

ASASWA is a highly modified reactive polyamide resin solution that is designed for: acid-catalyzed, alkyds (short, med., long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems.

SAFA 302 is an unique polymer blend of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. The polyether modified dimethlylpolysiloxane provides defoaming and mar resistance. The silicone glycol co-polymer gives the product the increased resin compatibility, surface tension reduction and lowers the coefficient of friction. SAFA 302 is virtually compatible with all types od solvent and water systems including emulsions. Blends of SAFA 302 and RAMA can further increase mar resistance in solvent systems and some water based products.

HSWADA is a unique blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent designed for solids non-aqueous systems. Systems include: alkyds, drying oils, amino resins, vinyls, acrylics, oil modified urethanes, polyesters, and epoxy esters.

901-GDA-2 is a Polyvinyl Isobutyl Ether Solution. Systems for this silicone-free additive are: acrylic resins, alkyds (long, med., short oils), polyamide, polyester and urethane.

FCABA 2 is a blend of silicone and organic acid esters. Designed for use in most non aqueous based coating systems, adhesives and inks. Prevents bubbles, and foam in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications.

AMA is dimethyl silicone designed to improve mar resistance and reduce surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane.

941 LBA is a linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums.

AMMA is a polyalkyeneoxide-modified polydimethylsiloxane (non-ionic) developed for high solids / high solids metallic coatings. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic, polyamide, polyester, urea and urethane.

#249 HI-TECH is a carefully calculated blend of Alkyl-Aryl modified silicones designed for high solids systems to improve Mar Resistance without the standard recoat problems of common silicones. Manufactured for use in virtually all high solids solvent-borne systems

C-485-FBRA is a unique Alkyl-Aryl air release agent. Designed for use in conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane.

LH-75 is a complex amide polymer modifier / additive that will impart and improve properties to all types of lacquers including nitrocellulose, acrylic, polyurethane and acid-catalyzed varnishes. LH-75 is also effective in polyester / melamine systems. Caution: We do not recommend use of LH-75 in systems containing a high level of aliphatic hydrocarbons.

AMAFCA is an Alkyl-Aryl silicone designed for foam control with the added benefit of improved mar resistance for virtually all solvent systems including high solids resins. Excellent for application defoaming in roller coater, flow coater, curtain coater, dip, conventional and airless spray systems.

HSWADA-60 is a unique blend of a functional capped amine with tall oil fatty acid. The resulting product is a triangular shaped wetting agent with high efficiency toward alkaline based pigments. The key to the utilization is to maintain maximum mobility of the grind paste during initial incorporation of pigment. This can be achieved by choosing a resin that has good wetting characteristics and provides the lowest viscosity at the maximum solids. Continue to add pigment until viscosity reaches 100-135 KU @ 120-150°F. The order of pigment addition should be primary colors and high oil absorption pigments followed by extenders and rheology modifiers. Bentonite clays can be activated by HSWADA-60 to produce a strong consistent gel. We recommend pre-activation and quality control checks to assure uniform gel formation. Systems include: alkyds, drying oils, amino resins, vinyls, acrylics, oil modified urethanes, polyesters, epoxies, and epoxy esters.

WREAMA is a solution of a polyether-modified dimethyl polysiloxane co-polymer designed for use in all waterbased and water reducible alkyd resin systems.

WRACLA is an anionic fluorosurfactant designed for use in water-based and water-reducible systems. Through improved wetting. WRACLA can be used to enhance adhesion to chalky surfaces in aqueous coatings.

SCABA is a reactive polyamide resin solution that is designed for pigmented systems: acid-catalyzed, alkyds (short, med., long oils), epoxy, epoxy ester, polyurethane and polyester.

TA-816 is a reactive siloxane polymer blend designed to produce a rough or textured appearance to paints and coatings containing, but not limited to non-leafing aluminum. Systems include: lacquers, alkyd, epoxy, melamine phenolic, polyester and urethane.

NOFO 1032 is a blend of silicone and organic acid esters. Designed for use in most nonaqueous based coating systems, adhesives and inks. Allows for air release of high build epoxy, urethane, and various casting resins.

HSWADA-B is a unique blend of amine chemistry with dimerized acids. The resulting product is a triangular shaped wetting agent with high efficiency toward acidic based pigments. The top of the triangle offers a weak functional group with an affinity for alkaline pigments. This chemistry should be considered when both acid and base pigments are present. The key to the utilization is to maintain maximum mobility of the grind paste during initial incorporation of pigment. This can be achieved by choosing a resin that has good wetting characteristics and provides the lowest viscosity at the maximum solids. Continue to add pigment until viscosity reaches 100-135 KU at 120-150°F. The order of pigment addition should be primary colors and high oil absorption pigments followed by extenders and rheology modifiers. Refer to HSWADA-60 for activation of bentonite clays. Systems include: alkyds, drying oils, amino resins, vinyls, acrylics, oil modified urethanes, polyesters, epoxies and epoxy esters and polyesters.

SLICKO 1000 is a complex blend of linear dimethicone polymers and aliphatic solvent. The result is a medium viscosity fluid solution which is easily measured and added to paints in very small quantities. SLICKO 1000 is non-reactive and is effective in all types of solvent based enamels, lacquers and synthetic paints including catalyzed systems such as urethanes.