Products

Ulpolen® 1000 (PE1000) is a type of polyethylene with average molecular weight over 5 million. ULPOLEN1000®’s resistance to impact and wear is much higher than that of other plastics in a wide temperature interval.

POM-C(Delrin)® is a semi crystalline thermoplastic with high mechanical strength and rigidity. The good dimensional stability and particularly good fatigue strength, as well as excellent machining ability, makes POM polymer a highly versatile engineering material, even for complex components.

Kestoil® is a self-lubricated, strong, wear resistant engineering plastic with a low coefficient of friction

Efalon® Bronze-filled B-40 is added in percentages of weight between 40 and 60%. PTFE Bronze filled has the best wear properties, remarkable compression strengths and good thermal conductivity, but poor electrical characteristics and chemical resistance. It is often used in hydraulic systems, particularly superb as linear bearings, e.g. slides, gibs, guide ways. The compound is easily machined. Bronze-filled is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat.

Efalon® Glass-filled C-15 is a PTFE glass filled is reinforced with glass fibers with the percentage 15% and 25% depending on the needs of the application.

Ulpolen® 500 offers increased wear resistance and impact strength compared to HDPE. It is extremely strong, has excellent resistance to chemicals and low temperatures and has very low moisture absorption. Ulpolen®PE300-HDPE (high-density polyethylene) offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.

Kestlub® is one of the most important developments in the Kestamid® product range. Kestlub® is a special type of cast polyamide ideal for bearings. It is produced by adding lubricants to cast polyamide through special processes. It performs extremely well in bearing applications as it is self-lubricated.

Efalon® Glass-filled C-25 is a PTFE glass filled is reinforced with glass fibers with the percentage 15% and 25% depending on the needs of the application.

Kestamid-HS® is Polikim’s cast polyamide with increased heat resistance.

Ulpolen® 300 offers increased wear resistance and impact strength compared to HDPE. It is extremely strong, has excellent resistance to chemicals and low temperatures and has very low moisture absorption. Ulpolen®PE300-HDPE (high-density polyethylene) offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.

Efalon® Carbon-filled K-35 is a PTFE carbon filled(C25 and C35) have less thermal expansion, higher wear resistance, less deformation under load properties compared to virgin Efalon®. Carbon filled PTFE has excellent mechanical and wear properties, retains the excellent frictional properties and is an excellent choice for seals and rings in dynamic and high pressure applications.

Polikim Kestamid®(PA6G-Cast Nylon) is one of the most commonly used engineering plastics.

Efalon® Bronze-filled B-60 is added in percentages of weight between 40 and 60%. PTFE Bronze filled has the best wear properties, remarkable compression strengths and good thermal conductivity, but poor electrical characteristics and chemical resistance. It is often used in hydraulic systems, particularly superb as linear bearings, e.g. slides, gibs, guide ways. The compound is easily machined. Bronze-filled is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat.

Efalon® Carbon-filled K-25 is a PTFE carbon filled(C25 and C35) have less thermal expansion, higher wear resistance, less deformation under load properties compared to virgin Efalon®. Carbon filled PTFE has excellent mechanical and wear properties, retains the excellent frictional properties and is an excellent choice for seals and rings in dynamic and high pressure applications.

Efalon® Virgin T-100 has molecular structure composed of carbon and fluor atoms, EFALON® (PTFE) has a long list of unique properties uncommon in other materials. Polikim can make the following changes in material properties to meet the application requirements:.