Products

Polynt Group 50, 50X - easy to sand and polish; excellent resistance to yellowing and fading due to sun exposure; resistance to thermal change and weathering; higher gloss recovery when polishing back aged or from lower gloss mold; excellent blister resistance. Main applications areas are building and construction, composites etc.

Armorflex® 960 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector etc.

Polynt Group SMC LPMC 7000 LP is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LPMC 7000 LP is studied to be molded at low pressure. This SMC has been developed for structural parts SMC LPMC 7000 LP joint good mechanical properties and good varnish adhesion. SMC LPMC 7000 LP is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Armorflex® 944 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector, marine etc.

Polymac® 2510 is a very versatile, high reactivity, carboxyl-functional polyester resin for powder coatings. It can be cured with epoxy resins with eew's from 500-1000 to yield hybrid formulations with polyester/epoxy ratios from 45:55 to 60:40. These interior decorative or primer coatings cure rapidly and have excellent mechanical and corrosion resistance properties.

ENYDYNE® H 88222 TA - Unsaturated polyester resin in styrene,DCPD. It is used to produce parts with high resistance to fire through hand lay up and spray up,injection molding,rtm method.

Stypol® RSP10021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Aquamac® 440 is a styrene acrylic latex for high gloss paints in architectural and light-duty industrial applications. It offers the formulator a low VOC alternative to alkyds for high gloss, interior trim, kitchen and bath, as well as dtm applications. This is a very versatile latex resin that is compatible with a variety of latex and water reducible resins in blend systems. Manufactured in North America. All components of this product are listed on the DSL.

ENYDYNE® H 66233 TA - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

Norsodyne® CMI15100W - modified with mma and UV absorber contained resin for solid surface, good scratch and weathering resistance. Main applications areas are building and construction, industrial sector etc.

Norsodyne® BR-290EXT - multicolor application, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

Duramac® 207-1388 has good compatibility with other resins; good viscosity control and enamel holdout; effective modifier for gloss reduction.

DISTITRON® 183 B1 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Norsodyne® 3338W has general purpose, good water resistance, promoted and wax version of Norsodyne® 3338. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® CMC15100W - orthophthalic resin for marble and onyx, promoted and waxed, low viscosity. Main applications areas are building and construction, industrial sector etc.

Polynt Group 781-2140 - vinyl ester infusion resin, unpromoted with a high HDT with blister and corrosion resistance; when formulated as recommended, meets the requirements of FDA title 21 CFR 177.2420. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, chemical industry, composites, food contact, industrial sector, marine, mass transports, paper industry etc.

Distitron® 412 V2 - resin for body, good mechanical properties. Main applications areas are agrochemical, agrobusiness, building and construction, industrial sector etc.

NORSODYNE® H 13239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through hand lay up and spray up,filament winding method.

NORSODYNE® H 73233 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flexibilise rigid resins.

ENYDYNE® T 67665 A - Unsaturated polyester resin in styrene,DCPD. It is used to produce isothermal sandwich panels through hand lay up and spray up method.

Aquamac® 720 is a surfactant-free, all acrylic latex designed for industrial maintenance applications where thin-film corrosion resistance is required. Formulated coatings utilizing this resin demonstrate excellent gloss, water resistance and adhesion to a variety of substrates. Aquamac® 720 is especially suitable for industrial primers where thin-film corrosion resistance is key. It has applicability in industrial markets including industrial maintenance, transportation and general industrial finishing. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® HS 57-5819 is a high solids chlorinated alkyd used for interior fire retardant coatings. It can be formulated to meet government specification DOD-E-24607A chlorinated alkyd interior semigloss enamel. Manufactured in North America.

STYPOL® 040-4985 and 040-4988 are clear,light colored,acrylic modified,chemical resistant NPG isophthalic resins designed specifically for spray granite applications where the user incorporates granite effect fillers.

Polynt Group 24X series gelcoats are enamel like coatings developed for the composites and fiberglass industry. These gelcoats are used as an enamel coating, similar to paint and are often used to hide any fiberglass pattern inside the part. This series is suitable for water immersion and can be used if high blister resistance is not a major concern. The 24X series gelcoat can also be used to protect the laminate against u.V. Rays. 24X series gelcoat is more like a polyester paint and offers improved cosmetic surface of fiberglass. 24X series gel coats are sag resistant and have a fast curing system.Formulated for spray and roll application.Fast gel time and cure time that provide a good cure.Require only the addition of a proper amount of mekp to cure.Easy to spray and rollgood hiding abilities. These gelcoats are available in a wide range of appealing colors. Color matching is available on request. The numbers following: 24x…indicate the product color code. For parts in contact with water, severe conditions we recommend an npg/iso base gelcoat. For fire retardant properties, we recommend a specific fire retardant base gelcoat. Parts that have to be assembled should be sanded before, to obtain a good adherence. 24 series gelcoat may be applied by brush, roller or spray.

Polydyne® 5056 is used for general purpose and gel coat formulation. Main applications areas are composites, eyewear and jewelers, textile industry etc.

EPOVIA OPTIMUM® KRF 2000 SE - Brominated Epoxy Resin based vinyl ester in styrene. It is used as general purpose in filament winding,vacuum injection,hand lay up and spray up,pultrusion method.

Norsodyne® 2321 - promoted and waxed, medium viscosity grade. Main applications areas are building and construction, industrial sector etc.

Polynt Group BMC A 1000/22 is a bulk molding compound based on an unsaturated polyester resin, reinforced with glass fibers. This BMC has been developed for high chemical resistance applications as wash-machine or industrial equipment in contact with alkaline solution/detergent. Good mechanical properties and easy molding behavior are combined into the BMC a 1000/22. BMC a 1000/22 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Norsodyne® SG-550 - for acrylic backup. Main applications areas are home and domestic applications etc.

Norsodyne® CM-750 - orthophthalic resin for general marble. Main applications areas are home and domestic applications etc.

DISTITRON® 440 V3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through casting method.

DISTITRON® 389 AV2,5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce statues through centrifugal casting method.

DISTITRON® 1404 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce abrasives,chips through casting method.

Norsodyne® 3210W - modified with mma and UV absorber contained resin for solid surface, good scratch and weathering resistance. Main applications areas are building and construction, industrial sector etc.

Polynt Group 787-5995 - toughened vinyl ester resin core shell rubber that offers dramatically improved fracture toughness and corrosion resistance of typical vinyl ester resins; promoted for room temperature cure. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

ENYDYNE® C 66141 - Unsaturated polyester resin in styrene,DCPD. It is used to produce polymeric concrete through casting method.