Products

POLYCOR® TOOLING PA CLEAR 0200 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.

DISTITRON® 822 S - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce putties through mix with fillers and/or additives.

DISTITRON® 429 V8 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat,statues,general purpose through casting,mix with fillers and/or additives method.

POLYCOR® TOOLING BR CLEAR 0200 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.

ENYDYNE® I 68871 A - Unsaturated polyester resin in styrene,DCPD. It is mainly used in hand lay up and spray up,injection molding,RTM etc.

Polycor® Tooling VE BR Neutral 0000 - speciality vinyl ester based gel coat formulated to provide our highest level of heat resistance. A high gloss durable surface, resilient to the repeated molding cycles of composite production. High levels of styrene and chemical resistance.

DISTITRON® 412 RV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,mix with fillers and/or additives method.

DISTITRON® 414 RV2,5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through mix with fillers and/or additives,casting.

Polynt Group 23 series of gelcoats are formulated specifically for composite mold making. It is formulated with a special base resin that permits an excellent resistance to heat distortion even after repeated use. They provide a high gloss and hard durable surface. These tooling gel coats are formulated ready-to-spray after the addition of the proper amount of appropriate methyl ethyl ketone peroxide or cumene hydro peroxide catalyst. The low opacity formulation help to detect default during spraying process. See section: application in PB-5 polyester tooling because even though manufacturing precautions are used to make tooling gelcoat, a misapplication of these products can produce unacceptable results.

Polycor® Tooling SP gel coats are formulated specifically for mold making. These precision-formulated gel coats utilize selected resins that exhibit high heat distortion to withstand the repeated molding of FRP laminates. None of these products contain lead. They provide a high gloss and hard durable surface. These tooling gel coats are formulated ready-to-spray after the addition of the proper amount of an appropriate methyl ethyl ketone peroxide catalyst. They are formulated to be low in hide so that imperfections can be easily spotted. Read application instructions carefully, because even though manufacturing precautions are used to make tooling gel coat, a misapplication of these products can produce unacceptable results.

DISTITRON® 429 V1,3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through injection molding,rtm method.

POLYCOR® TOOLING VE PA NEUTRAL 0000 - A pre-accelerated gel coat based on Vinyl Ester unsaturated polyester resin. Cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.

DISTITRON® 100 SV3 - Unsaturated polyester resin in styrene,DCPD. It is used to produce surficial protection (liner,top coat) through coating with glazing,spray and brush process method.