Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Features
- 0 VOC
- Fast-curing (40 minutes @ 77°F / 25°C)
- Low-Temperature cure (as low as –30°F / -34°C)
- Recoat time: 1 hour
- Walk-on Time: 1-2 hours
- Self-priming, excellent penetrating and bond strength
- Excellent abrasion, impact, and wear resistance
- Excellent color and gloss retention
- UV-resistant; optical clarity of clear sealer/finish Can add micro media agents to improve slip reduction
- Meets FDA/CFSAN, US Food Code, Physical Facilities criteria as outlined in 6.101.11 Surface Characteristics USDA acceptable
- Excellent resistance to chemicals and stains
- Skydrol resistant
- Random/incidental heat contact: tolerant to 300°F
- Low solvent odor
- Excellent Direct-To-Metal (DTM) coating — Passing 2,000 hours testing in salt-fog corrosion chamber (ASTM B117)
- Exceptional corrosion performance as a topcoat over Polyset WB
- HRZS® Primer on steel surfaces — Passing 13,000 hours in salt-fog corrosion chamber (ASTM B117)
Applications & Uses
- Applications
- Uses
Commercial/Industrial Flooring - Three-coat system consisting of self-priming color primer/sealer followed by clear “bed” coat for accepting and wetting decorative flake chips (or other decorative media), followed by clear sealer/finish coat Final clear sealer/finish over decorative concrete surfaces such as acid, color or dye stained, semi-polished concrete, polymer-modified cementitious overlayments, or seamless multi-build epoxy/color quartz flooring High foot traffic and vehicle/material-handling equipment areas UV-resistant sealer/finish coat over safety surfacing systems, outdoor running tracks, swimming pools, and patios
Steel Surfaces
- Storage Tanks
- Bridges
- Marine (ships, offshore rigs, barges, etc.)
- Railcars
- Pipelines
- Surface Preparation
Concrete: Recommended surface profile is SP-2, Reference ICRI Technical Guideline No. 03732. This is best achieved with mechanical grinding machines using diamond heads achieving a final 50 to 120-grit profile. Direct-To-Metal: All steel surfaces should be prepared to SSPC-SP10, Near-White finish with a minimum of 1.0 mil profile.
Technical Details & Test Data
- Technical Details
Mix Ratio Parts by Volume 1.0 part Base :1.0 part Catalyst Product Data (All readings taken at 77°F /25°C, unless noted) VOC Content (Lbs./gal.) 0 VOC Content (grams/Liter) 0 Flash Point 102°F Type of Material Polyaspartic (Aliphatic Polyurea) Color Available in all Standard Colors Finish High-Gloss or Clear-High Gloss Volume Solids (%) 72 Theoretical Estimated Coverage (ft2/gal.) 1155 at 1 mil DFT Recommended Film Thickness (mils/coat) 2—8 mils DFT Method of Application Spray, Brush, or Roll Thinner & Clean-Up Solvent Xylol or MEK Pot Life Approximately 30 minutes at 77°F / 25°C Drying Time 40 minutes at 77°F / 25°C & 50% RH Increased film thickness will take longer. Do not exceed 48 hours between coats.
Storage & Handling
- Shelf Life
1 year in the original. unopened containers
- Storage
Store between 40-100°F
Store in a dry, covered area away from direct sunlight.