Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Applications & Uses
- Application Method
- Compatible Substrates & Surfaces
- Application
This product can be applied by aerosol can.
- Shake the aerosol can, right side up, for a minimum of 60 seconds.
- Turn the can upside down and shake.
- After the product in shaken thoroughly you may apply by pressing on the spray nozzle.
- Repeat shaking after every minute of spraying
- After every use, turn the can upside down and press the nozzle down until the spray coming out is clear. This means that the nozzle is clear and has a lesser chance of clogging between uses.
NOTE: Application of PTI products requires the use of all OSHA approved safety equipment, including proper ventilation. Additionally, PTI products require the recommended temperature/humidity conditions and film thickness ranges for optimal performance. The material, hangar, and aircraft skin temperatures should be no lower than 75° F / 25° C before, during and after application.
- Drying and Curing Schedule
Dry times are based on the dry film thickness between 1-2 mils (25-50 microns).
Air Dry Times (75⁰F / 25⁰C and 50% Relative Humidity)
- Set to touch 15 mintues
- Dry through 2 hours
- Equipment Cleaning
Use clean PT-1022X66, Acetone or IPA. Do not allow material to dry or cure inside any equipment.
- Recommended Primer
Recommended Primer(s) - PT-522
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Coatings VOC | 409 - 685 | g/L | — |
Recommended Dry Film Thickness | 1.0 | mil | — |
Weight | 9 - 10 | lbs per gallon | — |
Packaging & Availability
- Packaging Type
Storage & Handling
- Shelf Life
Shelf life is only applicable for materials stored in unopened and undamaged original factory filled containers. 1 year when stored between 50°-85° Fahrenheit.