Products

Products Techniques PTW-150 Waterborne Lacquer Topcoat is a high performance, single component topcoat designed for interior or exterior use on high performance general aviation, business jet, and commercial aircraft. PTW-150 meets and exceeds MIL-PRF81352C TYI is an excellent coating to apply over both metal and composite substrates. This product is available in bulk and aerosol cans.

Products Techniques A-A-665d Nitrocellulose Lacquer is a nitrocellulose lacquer that is packaged in an aerosol can. This lacquer is intended for use on metal or composite surfaces.

Products Techniques PT-426F Low VOC Epoxy Topcoat is a high performance, two component catalyst cure epoxy topcoat designed for exterior use on high performance aviation/aerospace, industrial, and marine applications. PT-426G Series Epoxy meets, and exceeds MIL-PRF-22750E, F & G Type I CL H GRADE B as well as BMS 10-11V Type II. This high performance coating contains no substance of know toxicity (under normal usage conditions) and provides ultimate protection. These epoxy topcoats provide a high quality finish to metal, wood, and most other materials capable of being coated and offer excellent chemical resistance properties.

Products Techniques PT-522 Black Zinc Chromate Alkyd Primer comes under Primers Type and is available in bulk and aerosol cans.

Products Techniques PT-402 Acid Etching Primer is a polyvinyl butyral zinc chromate formulation that may be used to prime all plain or plated metallic surfaces. Priming surfaces with PT-402 Acid Etching Primer prior to priming with epoxy primer MIL-PRF-23377 or by itself will ensure maximum adhesion and protection of all bake or air-dry finish coats (including lacquer finish coats). The finely ground emulsions of zinc chromate pigments, resins and phosphoric acid hardeners are virtually non-settling. Once applied, the Acid Etching Primer requires no sanding and has a pot life of 8 hours. Extreme humidity can affect the bonding of the coating.

Products Techniques PT-805 High Heat Silicone Coating comes under silicones type and is available in bulk.

Products Techniques PT-428D Conventional Epoxy is a two component catalyst cure epoxy polyamide, which meets and exceeds MIL-C-22750D. This system cures to an extremely hard, impervious film which resists yellowing and chalking. PT-428D Tuf /Film provides the ultimate protection and appearance to metal, wood and most other materials capable of being coated. This is a non-conductive, dielectric coating.

Products Techniques PT-500E Epoxy Primer is a low VOC epoxy polyamide solvent primer which conforms to MIL-P-23377 Rev. E. This coating is highly recommended for use on aluminum and plated plated or un-plated metallic surface to insure maximum protection against corrosion. PTI Epoxy Primer also insures maximum adhesion of PTI TUF/FILM coating, or any other paint or lacquer finish coats. This Primer is intended to be used for aircraft, marine, original equipment manufacturing and/or industrial applications.