Products

Protective Industrial Polymers PIP 2200 UR is the 100g/L VOC version of PIP 2100 UR. It is specifically formulated for use in geographical areas where maximum VOC restrictions are set at 100g/L for industrial maintenance coatings. PIP 2200 UR is a high-solids, high-gloss, two or three-part, aliphatic clear or pigmented polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor.

Protective Industrial Polymers PIP 1000 ST are a two-component or three component (with color packs), universal, 100% solids, epoxy resin coating systems that can be applied either clear or pigmented. PIP 1000 has a universal, clear unfilled “A” component (1000-A) and is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements and final esthetics. This product produces a gloss finish.

Protective Industrial Polymers PIP 1000 HB are a two-component or three component (with color packs), universal, 100% solids, epoxy resin coating systems that can be applied either clear or pigmented. PIP 1000 has a universal, clear unfilled “A” component (1000-A) and is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements and final esthetics. This product produces a gloss finish.

Protective Industrial Polymers PIP 2100 UR-Satin is a high-solids, smooth, satin, three-part, aliphatic polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor. It may be applied as a clear coat rendering UV protection of underlying epoxy basecoats.

Protective Industrial Polymers PIP 2000 UR is a high-solids, high-gloss, three-part, aliphatic pigmented polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor.

Protective Industrial Polymers PIP 1000 FS are a two-component or three component (with color packs), universal, 100% solids, epoxy resin coating systems that can be applied either clear or pigmented. PIP 1000 has a universal, clear unfilled “A” component (1000-A) and is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements and final esthetics. This product produces a gloss finish.

Protective Industrial Polymers PIP 2100 UR-Gloss is a high-solids, two part, aliphatic clear polyurethane coating. PIP 2100 UR-Gloss is formulated to greatly reduce damaging UV rays from penetrating and yellowing an epoxy basecoat. PIP 2100 UR-Gloss is recommended as the clear finishing coat on decorative flake, quartz or metallic pigmented flooring systems. Added abrasion resistance may be obtained with the optional DiamondWear additive or GlossGrip #10 additive. Addition of the DiamondWear Additive will result in a satin finish whereas the addition of GlossGrip #10 will maintain gloss and exhibit slight skid resistance and easily cleaned finish.

Protective Industrial Polymers PIP 1000 CR are a two-component or three component (with color packs), universal, 100% solids, epoxy resin coating systems that can be applied either clear or pigmented. PIP 1000 has a universal, clear unfilled “A” component (1000-A) and is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements and final esthetics. This product produces a gloss finish.

Protective Industrial Polymers PIP 0075 is a two-component, 100% solids, epoxy coating system designed primarily for use as a clear top coat for decorative aggregate flake or quartz broadcast systems. PIP 0075 is formulated with near colorless components resulting in a a very clear coating compared to standard epoxy resin coatings. PIP 0075 is extremely low yellowing and exhibits excellent blush resistance. This product can be tinted on site via the use of PIP CPU color pack which results in a solid color low yellowing epoxy finish coat.