Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
Properties
- Mechanical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Mix Ratio (By Weight ) | 100 - 26 | Wt. | PTM&W |
| Mixed Viscosity | 300 - 600 | cps | — |
| Cured Hardness | 86 | Shore D | ASTM D2240 |
| Specific Gravity | 1.04 - 1.10 | — | ASTM D1475 |
| Tensile Strength | 6970 | psi | ASTM D638 |
| Tensile modulus | 496000 | psi | ASTM D638 |
| Elongation At Break | 1.5 | % | ASTM D638 |
| Flexural Strength | 14226 | psi | ASTM D790 |
| Flexural Modulus | 563824 | psi | ASTM D790 |
| Compressive Strength | 14360 | psi | ASTM D695 |
| Glass Transition Temp. {Tg, DSC} | 144 | °F | ASTM D7028 |
| Glass Transition Temp. {Tg, TMA} | 145 | °F | ASTM D7028 |
| Glass Transition Temp. (DMA, Tg Peak) | 145 | °F | ASTM D7028 |
| Thermal Coefficient of Expansion (Range: 30°C to 50°C) | 3.54 x 10^-5 | °F | ASTM D696 |
| Value | Units | Test Method / Conditions | |
| Pot Life (4 fl. Oz. Mass At 77°F) | 25 - 45 | min. | D2471 |
Packaging & Availability
- Packaging Weights
003700 is packaged in glass Pint bottles at 1 Ib, Net Weight each for Part A and Part B. A Kit consists of 3 Pints Part A plus 1 Pint Part B.
Storage & Handling
- Handling Instructions
- Combine 100 parts by weight 003700 Part A with 26 parts by weight 0C3700 Part B, and mix thoroughly.
- Gel time is 25 to 45 minutes @ 77°F in a 100 gram mass.
- A cure sufficient for handling will be achieved in 24 to 36 hours at room temperature, or 4 to 6 hours at 150°F. In either case, full cure is achieved after 5 to 7 days at room temperature.
- Parts bonded with 003700 can be removed by immersing in Dimethyl Formamide (DMF) at 180°F - 200°F for 8 to 24 hours.
* CAUTION: DMF is a tetraterogen, and supplier's precautions must be followed.