LNP™ COLORCOMP™ Compound DX06407

Identification & Functionality

Additives Included

Mold Release Agent

Chemical Family

Polycarbonate (PC)

Polymer Name

Polycarbonate (PC)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics,

Polycarbonates

Features & Benefits

Labeling Claims

No Added PFAS

Materials Features

Easy To Mold,

Excellent Aesthetics,

Good Aesthetics,

Good Mold Release,

Good Moldability,

Good Processability,

Good Surface Appearance,

No Added PFAS,

Unreinforced

Applications & Uses

Markets

Automotive & Transportation,

Consumer Goods,

Electrical & Electronics,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Interior

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Consumer Goods — Housewares

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Appliances,

Automotive Interior Parts,

Cell Phones,

Commercial Appliance,

Computer Components,

Consumer Applications,

Containers,

Displays,

Electrical Components,

Electrical/Electronic Applications,

Home Appliances,

Home Decors,

Household Goods,

Medical/Healthcare Applications,

Personal Accessories,

Sporting Goods,

Tablets

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Color

Custom

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	63	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	58	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	6.2	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	94	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	2340	MPa	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2400	MPa	ASTM D790
Tensile Stress (Yield, 5 mm/min) ¹¹	65	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	54	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	6.3	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	104	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2300	MPa	ISO 527
Flexural Stress ¹¹	91	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2290	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.2	—	ASTM D792
Density ¹¹	1.2	g/cm³	ASTM D792
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.7 - 0.9	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1 - 3	%	ASTM D955
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	10.5	g/10 min	ASTM D1238
Melt Volume Rate (at 300°C, 1.2 kg) ¹¹	12	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	103	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	94	°C	ASTM D648
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	104	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	96	°C	ISO 75/Af

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	1310	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	781	J/m	ASTM D256
Multi-Axial Impact ¹¹	69	J	ISO 6603
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	63	J	ASTM D3763
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	224	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	9	kJ/m²	ISO 180/1A

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120	°C	—
Drying Time ⁷	4.00E+00	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	305 - 325	°C	—
Front - Zone 3 Temperature ⁷	320 - 330	°C	—
Middle - Zone 2 Temperature ⁷	310 - 320	°C	—
Rear - Zone 1 Temperature ⁷	295 - 305	°C	—
Mold Temperature ⁷	80 - 110	°C	—
Back Pressure ⁷	0.2 - 0.3	MPa	—
Screw Speed ⁷	30 - 60	rpm	—

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Regional Availability

• Americas
• Asia
• Europe
• North America