LNP COLORCOMP™ Compound - J1000 - SABIC's Specialty

Identification & Functionality

Chemical Family: Polysulfones
Polymer Name: Polyethersulfone (PES)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Labeling Claims: No Added PFAS
Materials Features: Excellent Aesthetics,
Good Aesthetics,
Good Surface Appearance,
High Durability,
High Temperature Resistance,
No Added PFAS,
Unreinforced,
Very Good Heat Resistance

Applications & Uses

Markets: Automotive & Transportation,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Interior
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Appliances,
Automotive Applications,
Automotive Interior Parts,
Cell Phones,
Commercial Appliance,
Computer Components,
Consumer Applications,
Containers,
Displays,
Electrical Components,
Electrical/Electronic Applications,
Home Appliances,
Personal Accessories,
Sporting Goods,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Color: Custom
Flame Rating: UL 94 V0
Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, 50 mm/min) ¹¹	91	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	67	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	6.8	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2700	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	128	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2600	MPa	ISO 178

	Value	Units	Test Method / Conditions
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.000059	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.000059	1/°C	ISO 11359-2
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	216	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	201	°C	ISO 75/Af

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	No break	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	7	kJ/m²	ISO 180/1A

	Value	Units	Test Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ	0.5	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ COLORCOMP™ Compound J1000