LNP COLORCOMP™ Compound - J1000AE - SABIC's Specialty

Identification & Functionality

Chemical Family: Polysulfones
Polymer Name: Polyethersulfone (PES)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Materials Features: Easy To Mold,
Excellent Aesthetics,
Good Aesthetics,
Good Moldability,
Good Processability,
Good Surface Appearance,
High Durability,
High Temperature Resistance,
Unreinforced,
Very Good Heat Resistance

Applications & Uses

Markets: Automotive & Transportation,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Interior
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Appliances,
Automotive Applications,
Automotive Interior Parts,
Cell Phones,
Commercial Appliance,
Computer Components,
Consumer Applications,
Containers,
Displays,
Electrical Components,
Electrical/Electronic Applications,
Home Appliances,
Personal Accessories,
Sporting Goods,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Color: Custom
Flame Rating: UL 94 V0,
UL 94 V2
Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	88	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	6.5	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2690	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	125	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2620	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.37	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.5	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.6	%	ASTM D955

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	200	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.000052	1/°C	ASTM D696
Relative Temperature Index (Electrical) ᵖ ¹¹	180	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	170	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	180	°C	UL 746B

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	53	J/m	ASTM D256

	Value	Units	Test Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 0.81	mm	UL 94
UL Recognized (94V-2 Flame Class Rating) ᵖ	min. 0.43	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ COLORCOMP™ Compound J1000AE