LNP™ ELCRES™ SLX1271D

Identification & Functionality

Additives Included

UV Stabilizer

Chemical Family

Polycarbonate (PC)

Polymer Name

Polycarbonate (PC)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics,

Polycarbonates

Features & Benefits

Labeling Claims

No Added PFAS

Materials Features

Good UV Stability,

Good Weather Stability,

High Flow,

High Flowability,

No Added PFAS,

UV Resistant,

UV Stabilized,

Unreinforced,

Wear Resistant

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Electrical & Electronics

Applications

Automotive & Transportation — Automotive

Automotive Lighting,

Exterior & Body

Building & Construction — Building Materials

Interior Fixtures

Electrical & Electronics — Devices & Assemblies

Lighting

Plastics & Elastomers End Uses

Automotive Applications,

Automotive Exterior Parts,

Automotive Exterior Trim,

Electrical/Electronic Applications,

Forward Lighting,

LED Lighting,

Lighting Applications

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	1.21	g/cm³	ISO 1183
Moisture Absorption (at 23°C, 50% RH, Equilibrium) ¹¹	0.15	%	ISO 62-4
Water Absorption (at 23°C, saturated) ¹¹	0.32	%	ISO 62-1
Melt Volume Rate (at 300°C, 1.2 kg) ¹¹	16	cm³/10 min	ASTM D1238
Specific Gravity ¹¹	1.2	—	ASTM D792
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	18	g/10 min	ASTM D1238
Mold Shrinkage (flow) ᵍ ¹¹	0.75	%	SABIC method

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Modulus (at 1 mm/min) ¹¹	2256	MPa	ISO 527
Tensile Stress (Yield, 50 mm/min) ¹¹	66	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	68	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	6.2	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	115	%	ISO 527
Flexural Modulus (at 2 mm/min) ¹¹	2255	MPa	ISO 178
Flexural Strength (at 2 mm/min) ¹¹	97	MPa	ISO 178
Tensile Modulus (at 5 mm/min) ¹¹	2292	MPa	ASTM D638
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	65	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	62	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	6.3	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	83	%	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2480	MPa	ASTM D790
Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹	98	MPa	ASTM D790

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	123	°C	ISO 75/Af
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	134	°C	ISO 75/Bf
Vicat Softening Temperature (Rate B/50) ¹¹	138	°C	ISO 306
Vicat Softening Temperature (Rate B/50) ¹¹	138	°C	ASTM D1525
Vicat Softening Temperature (Rate B/120) ¹¹	139	°C	ISO 306
Vicat Softening Temperature (Rate B/120) ¹¹	139	°C	ASTM D1525
Coefficient of Thermal Expansion (at 23°C to 50°C, flow) ¹¹	0.000071	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 50°C, flow) ¹¹	0.000071	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 23°C to 50°C, xflow) ¹¹	0.000072	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 50°C, xflow) ¹¹	0.000072	1/°C	ASTM E831
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	123	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	133	°C	ASTM D648

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80*10*3, at 23°C) ¹¹	10	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*3, at 0°C) ¹¹	9	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*3, at -30°C) ¹¹	7	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹	8	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹	7	kJ/m²	ISO 179/1eA
Multi-Axial Instrumented Impact Total Energy (at 23°C, 4.4 m/s) ¹¹	110	J	ISO 6603-2
Multi-Axial Instrumented Impact Total Energy (at -30°C, 4.4 m/s) ¹¹	108	J	ISO 6603-2
Izod Impact (Notched, at 0°C) ¹¹	99	J/m	ASTM D256
Izod Impact (Notched, at 23°C) ¹¹	239	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	98	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C, 4.4 m/s) ¹¹	57	J	ASTM D3763
Instrumented Dart Impact Peak Force (at 23°C, 4.4 m/s) ¹¹	5900	N	ASTM D3763

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120	°C	—
Drying Time ⁷	2 - 4	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	280 - 310	°C	—
Rear - Zone 1 Temperature ⁷	260 - 280	°C	—
Middle - Zone 2 Temperature ⁷	270 - 290	°C	—
Front - Zone 3 Temperature ⁷	280 - 310	°C	—
Nozzle Temperature ⁷	270 - 290	°C	—
Mold Temperature ⁷	80 - 110	°C	—

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America