LNP LUBRICOMP™ Compound - YL003C - SABIC's Specialty

Identification & Functionality

Additives Included: Heat Stabilizer,
Lubricant (PTFE),
Mold Release Agent
Chemical Family: Polyesters
Fillers Included: PTFE
Polymer Name: Thermoplastic Polyester Elastomer
Technologies: Elastomers
Product Families: Elastomers — Thermoplastic Elastomers
Thermoplastic Polyester Elastomers (TPE-E)

Features & Benefits

Materials Features: Friction Resistant,
Good Mold Release,
Heat Stabilized,
Low Liquid Particle Count,
Low Outgassing,
Unreinforced,
Wear Resistant

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics,
Industrial
Applications: Consumer Goods — Appliances & Electronics
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays,
Industrial Automation
Consumer Goods — Lawn & Garden
Electrical & Electronics — Parts & Components
Connectors,
Semiconductor Manufacturing,
Switches & Relays
Plastics & Elastomers End Uses: Cell Phones,
Computer Components,
Displays,
Electrical Components,
Electrical/Electronic Applications,
Industrial Applications,
Semiconductor Applications,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Flame Rating: UL 94 HB
Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

	Value	Units	Test Method / Conditions
Density ¹¹	1.27	g/cm³	ISO 1183
Density ¹¹	1.27	g/cm³	ASTM D792
Water Absorption (at 23°C, 48hrs) ¹¹	0.2	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	1.5 - 1.7	%	ASTM D955
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	1.6	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1.7 - 1.9	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1.8	%	ISO 294
Water Absorption (at 23°C, saturated) ¹¹	0.5	%	ISO 62-1

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹	85	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	54	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.00011	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.00011	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.00018	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.00018	1/°C	ISO 11359-2
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	88	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	57	°C	ISO 75/Af

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	1	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ LUBRICOMP™ Compound YL003C