LNP™ THERMOCOMP™ Compound AF002XXC

Identification & Functionality

Chemical Family

Acrylonitrile Butadiene Styrene (ABS),

Styrenics

Fillers Included

Glass Fiber

Polymer Name

Acrylonitrile Butadiene Styrene (ABS)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Styrenics

Features & Benefits

Materials Features

Cost Effective,

High Modulus,

High Stiffness

Applications & Uses

Markets

Consumer Goods,

Electrical & Electronics,

Healthcare & Pharma

Applications

Consumer Goods — Appliances & Electronics

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Healthcare & Pharma — Medical

Laboratory & Diagnostics,

Medical Devices & Assemblies

Plastics & Elastomers End Uses

Cell Phones,

Clinical Diagnostics,

Computer Components,

Displays,

Electrical/Electronic Applications,

Labware,

Medical/Healthcare Applications,

Tablets

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 HB

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break) ¹¹	64	MPa	ISO 527
Tensile Stress (Break) ¹¹	66	MPa	ASTM D638
Tensile Strain (Break) ¹¹	2.7	%	ISO 527
Tensile Strain (Break) ¹¹	2.5	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	4130	MPa	ASTM D638
Flexural Stress ¹¹	107	MPa	ISO 178
Flexural Stress ¹¹	105	MPa	ASTM D790
Flexural Modulus ¹¹	4500	MPa	ISO 178
Flexural Modulus ¹¹	4200	MPa	ASTM D790
Tensile Modulus (at 1 mm/min) ¹¹	4200	MPa	ISO 527

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	1.1	g/cm³	ISO 1183
Density ¹¹	1.111	g/cm³	ASTM D792
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.41	%	ISO 294
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.38	%	ISO 294
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.38	%	ISO 62

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	101	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	92	°C	ASTM D648
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	95	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	60	°C	UL 746B

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	320	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	80	J/m	ASTM D256
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	15	J	ASTM D3763
Multi-Axial Impact ¹¹	3	J	ISO 6603
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	24	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	9	kJ/m²	ISO 180/1A

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	80	°C	—
Drying Time ⁷	4	Hrs	—
Maximum Moisture Content ⁷	0.05 - 0.1	%	—
Melt Temperature ⁷	260	°C	—
Front - Zone 3 Temperature ⁷	265 - 275	°C	—
Middle - Zone 2 Temperature ⁷	230 - 245	°C	—
Rear - Zone 1 Temperature ⁷	205 - 215	°C	—
Mold Temperature ⁷	70 - 80	°C	—
Back Pressure ⁷	0.2 - 0.3	MPa	—
Screw Speed ⁷	30 - 60	rpm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	1.5	mm	UL 94

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America