LNP THERMOCOMP™ Compound - CX05470 - SABIC's Specialty

Identification & Functionality

Features & Benefits

Materials Features: Cost Effective,
Good Mold Release,
High Impact Performance,
High Modulus,
High Stiffness

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Consumer Goods,
Electrical & Electronics,
Industrial
Applications: Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Interior
Building & Construction — Building Envelope & Roofing
Glazing & Window Elements
Building & Construction — Building Materials
Interior Fixtures
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays,
Industrial Automation
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Automotive Applications,
Automotive Interior Parts,
Building Materials,
Cell Phones,
Computer Components,
Construction Applications,
Consumer Applications,
Displays,
Electrical/Electronic Applications,
Industrial Applications,
Sporting Goods,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Flexural Strength (at 2 mm/min) ¹¹	85	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	6320	MPa	ISO 178
Tensile Stress (Break, 5 mm/min) ¹¹	52	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	1.1	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	6800	MPa	ISO 527
Tensile Modulus (at 5 mm/min) ¹¹	7100	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	56	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	1.2	%	ASTM D638
Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹	90	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	6480	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.07	%	ISO 62
Density ¹¹	1.18	g/cm³	ASTM D792
Specific Gravity ¹¹	1.18	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.06	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.1 - 0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.2 - 0.5	%	ASTM D955

	Value	Units	Test Method / Conditions
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	97	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	92	°C	ISO 75/Af
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	97	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	93	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.000056	1/°C	ASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹	0.000069	1/°C	ASTM D696

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80104, at 23°C) ¹¹	3	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	9	kJ/m²	ISO 180/1U
Multi-Axial Impact ¹¹	2	J	ISO 6603
Izod Impact (Unnotched, at 23°C) ¹¹	156	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	36	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	8	J	ASTM D3763

Packaging & Availability

LNP™ THERMOCOMP™ Compound CX05470