LNP™ THERMOCOMP™ Compound EC008PXQ

Identification & Functionality

Additives Included

Flame Retardant

Chemical Family

Polyetherimide (PEI),

Polyimides (PI)

Fillers Included

Carbon Fiber

Polymer Name

Polyether Imide (PEI)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Features & Benefits

Labeling Claims

No Added PFAS

Materials Features

Cost Effective,

Electrically Conductive,

Flame Retardant,

Good Processability,

High Flowability,

High Stiffness,

High Strength,

High Temperature Resistance,

Light Weight,

No Added PFAS,

Very Good Heat Resistance

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics

Applications

Automotive & Transportation — Automotive

Powertrain & UTH

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Consumer Goods — Sports & Recreation

Automotive & Transportation — Transportation

Aerospace & Aviation

Plastics & Elastomers End Uses

Aerospace Applications,

Automotive Under The Hood,

Building Materials,

Construction Applications,

Electrical Components,

Electrical/Electronic Applications,

Sporting Goods

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	272	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	1	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	38600	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	372	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	32600	MPa	ASTM D790
Hardness (Rockwell M) ¹¹	112	—	ASTM D785
Tensile Stress (Break, 5 mm/min) ¹¹	247	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	0.9	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	35480	MPa	ISO 527
Flexural Stress (Break, 2 mm/min) ¹¹	364	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	30560	MPa	ISO 178
Compressive Strength ¹¹	222	MPa	SABIC method
Shear Modulus ¹¹	4656	MPa	ASTM D732
Shear Strength ¹¹	120	MPa	ASTM D732

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.44	—	ASTM D792
Density ¹¹	1.43	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.11	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.1 - 0.3	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.1 - 0.5	%	ASTM D955
Melt Flow Rate (at 380°C, 6.7 kgf) ¹¹	15	g/10 min	ASTM D1238
Poisson's Ratio ¹¹	0.4	—	ASTM E132

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	193	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 150°C, flow) ¹¹	0.0000027	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 150°C, xflow) ¹¹	0.000036	1/°C	ASTM E831

Electrical Properties

	Value	Units	Test Method / Conditions
Volume Resistivity ¹¹	450	Ω.cm	ASTM D257
Surface Resistivity ¹¹	4100	Ω	ASTM D257

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	597	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	74	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	7	J	ASTM D3763
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	33	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	6	kJ/m²	ISO 180/1A

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	150	°C	—
Drying Time ⁷	4 - 6	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	360 - 400	°C	—
Rear - Zone 1 Temperature ⁷	360 - 380	°C	—
Middle - Zone 2 Temperature ⁷	370 - 390	°C	—
Front - Zone 3 Temperature ⁷	380 - 400	°C	—
Nozzle Temperature ⁷	390 - 400	°C	—
Mold Temperature ⁷	140 - 180	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed (Circumferential speed) ⁷	0.2 - 0.3	m/s	—
Vent Depth ⁷	0.025 - 0.076	mm	—

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Quality Standards

FAR 25.853

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America