LNP THERMOCOMP™ Compound - LC008EXQ - SABIC's Specialty

Identification & Functionality

Chemical Family: Polyether Ether Ketone (PEEK)
Fillers Included: Carbon Fiber
Polymer Name: Polyetheretherketone (PEEK)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Materials Features: Cost Effective,
ESD Protection,
Easy To Mold,
Electrically Conductive,
Good Moldability,
Good Processability,
High Stiffness,
High Strength,
High Temperature Resistance,
Light Weight,
Very Good Heat Resistance

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Consumer Goods,
Electrical & Electronics
Applications: Automotive & Transportation — Automotive
Powertrain & UTH
Building & Construction — Building Envelope & Roofing
Glazing & Window Elements
Building & Construction — Building Materials
Interior Fixtures
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Consumer Goods — Sports & Recreation
Automotive & Transportation — Transportation
Aerospace & Aviation
Plastics & Elastomers End Uses: Aerospace Applications,
Automotive Applications,
Automotive Under The Hood,
Building Materials,
Construction Applications,
Consumer Applications,
Electrical Components,
Electrical/Electronic Applications,
Electronic Components,
Sporting Goods
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	330	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	1.5	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	41480	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	492	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	35200	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	321	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	1.4	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	40420	MPa	ISO 527
Flexural Stress ¹¹	460	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	33820	MPa	ISO 178
Compressive Strength ¹¹	215	MPa	SABIC method
Shear Modulus ¹¹	5003	MPa	ASTM D732
Shear Strength ¹¹	126	MPa	ASTM D732

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.44	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.05	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.15 - 0.3	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.7 - 1.4	%	ASTM D955
Poisson's Ratio ¹¹	0.47	—	ASTM E132

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	335	°C	ASTM D648

	Value	Units	Test Method / Conditions
Surface Resistivity ¹¹	100 - 1000	Ω	ASTM D257

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	863	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	82	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	7	J	ASTM D3763

Regulatory & Compliance

Packaging & Availability

LNP™ THERMOCOMP™ Compound LC008EXQ