Products

SABIC's Specialties Business NORYL™ PKN4752 resin is a non-reinforced, translucent, high heat blend of polyphenylene ether (PPE) + general purpose polystyrene (GPPS). This extrudable and injection moldable grade exhibits high heat resistance, dimensional stability, and appears translucent with a yellow tint in the natural color. NORYL™ PKN4752 resin is an excellent candidate for high performance packaging in food, electronics, and healthcare. *See NORYL™ PKN4752F resin for FDA food compliant version.

LNP LUBRICOMP YP003 compound is based on Polyester Elastomer resin containing 15% PTFE/silicone. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business NORYL™ N225X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N225X resin offers good dielectric strength and strong electrical performance in addition to low moisture absorption and dimensional stability, This material is an excellent candidate for both indoor and outdoor electrical applications.

SABIC's Specialties Business NORYL™ NC208 compound is based on Polyphenylene Ether (PPE) resin containing 8% carbon fiber. Added features of this grade include: Electrically Conductive, Non-Brominated, Non-Chlorinated Flame Retardant.

SABIC's Specialties Business LNP™ STAT-KON™ WEF42I compound is based on Polybutylene Terephthalate (PBT) resin containing 10% carbon fiber, 20% glass fiber. Added features of this grade include: High Impact, Electrically Conductive.

LNP LUBRICOMP DP003 compound is based on Polycarbonate (PC) resin containing 15% PTFE/silicone. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business FLEX NORYL WCD801AU resin is a flexible, non-reinforced, UV stabilized extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and performance capable of meeting UL VW-1 requirements, 80C end use temperature rating, and heat deformation performance as defined by UL 1581. FLEX NORYL WCD801AU resin is intended for evaluation in wire insulation and cable jacket applications in light colors. It has a Shore A Hardness reading of 82 and exhibits superior thermal stability, very low water absorption, good electric properties, low specific gravity, and good color stability after UV weathering per ASTM D4459. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.

SABIC's Specialties Business NORYL™ N850 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This high flow, injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F2. NORYL™ N850 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for electrical and business equipment applications.

LNP THERMOCOMP LC008EXQ compound is based on Polyetheretherketone (PEEK) resin containing 40% carbon fiber. Added features of this grade include: Electrically Conductive, Easy Molding.

SABIC's Specialties Business LNP™ STAT-KON™ JK800 compound is based on Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend containing 8% carbon fiber. Added features of this grade include: Electrically Conductive, Good Hydrolytic Stability, Non-Brominated, Non-Chlorinated Flame Retardant.

SABIC's Specialties Business ELCRES FXP1430 is PC-siloxane copolymer in special "Luster Plus" pearlescent appearance, which is part of the VisualFx family. This product features vivid and resplendent look with improved ductility and medium flow. UV stabilized. Color package may affect performance. Applications include housing of consumer electronics, cosmetic packaging, automotive interior decoration, etc.

SABIC's Specialties Business LNP LUBRICOMP DFL349 compound is based on Polycarbonate (PC) resin containing 20% glass fiber, 15% PTFE. Added features of this grade include: Flame Retardant, Wear Resistant.

High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing.

PC+ABS, ECO-conforming flame retardant with diamond sparkle appearance. Color package may affect performance.

LNP LUBRICOMP JD4901 compound is based on Polyetherimide (PEI) resin containing 20% glass fiber, 10% PTFE. Added features of this grade include: Wear Resistant.

VALOX VC120 compound is based on Polybutylene Terephthalate (PBT) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive, Flame Retardant.

Antistatic colorable/opaque FR PC grade

SABIC's Specialties Business LNP LUBRICOMP WFL34 compound is based on Polybutylene Terephthalate (PBT) resin containing 20% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP KONDUIT OTF2B compound is based on Polyphenylene Sulfide (PPS) resin containing 10% glass fiber and 55% proprietary thermal fillers. Added features of this grade include: Thermally Conductive.

SABIC's Specialties Business LNP™ THERMOCOMP™ EC006PXQ compound is based on Polyetherimide (PEI) resin containing 30% carbon fiber. Added features of this grade include: Electrically Conductive, Exceptional Processing, FAR25.853 Compliant.

SABIC's Specialties Business NORYL™ N190X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N190X resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytical stability. This material is an excellent candidate for indoor and outdoor electrical enclosure, wall plate / switch, connector, and solar / photovoltaic junction box applications.

LNP LUBRICOMP DL003E compound is based on Polycarbonate (PC) resin containing 15% PTFE. Added features of this grade include: Easy Molding, Wear Resistant.

LNP STAT-KON RE003 compound is based on Nylon 6/6 resin containing 15% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP LUBRICOMP RFL36XXY compound is based on Nylon 6/6 resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP™ THERMOTUF™ OF006I compound is based on linear Polyphenylene Sulfide (PPS) resin compound containing 30% glass fiber. Added features of this grade include: Impact Modified.

LNP LUBRICOMP KL004A compound is based on Acetal (POM) Homopolymer resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP ELCRES EXL9034 is based on Polycarbonate (PC) siloxane copolymer resin with excellent low temperature ductility, robust flame retardancy (V0/5VA), good processability and electrical tracking resistance. It is UV stabilized with F1 rating and is a good candidate for applications like photovoltaic connectors.

SABIC's Specialties Business LNP LUBRICOMP EFL36E compound is based on Polyetherimide (PEI) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Easy Molding, Wear Resistant.

NORYL 115EM4 compound is based on Polyphenylene Ether (PPE) resin containing conductive carbon powder and minerals. Added features of this grade include: Electrically Conductive.

SABIC's Specialties Business NORYL™ PCN2910 resin is a 35% glass fiber and mineral reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This high modulus, injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VB at 2.3mm, V0 at 3mm, and V1 at 1.5mm. NORYL™ PCN2910 resin exhibits good dimensional stability, low specific gravity, and Low Warpage. It is an excellent candidate for printer chassis applications where high modulus and tight tolerance molding are required.

SABIC's Specialties Business LNP LUBRICOMP WFL36 compound is based on Polybutylene Terephthalate (PBT) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP DL003 compound is based on Polycarbonate (PC) resin containing 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business CYCOLOY CS9610 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable low smoke, non chlorinated/brominated flame retardant grade. It has good mechanical and impact properties and has a UL94 V0@2.0mm and 5VB@2.0mm flame rating.

SABIC's Specialties Business ULTEM™ Resin 2210R is a 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP LUBRICOMP UFL36S compound is based on Polyphthalamide (PPA) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Heat Stabilized, Internally Lubricated, Wear Resistant, Bearing Grade.

SABIC's Specialties Business LNP™ LUBRILOY™ RF203XXH compound is based on Nylon 6/6 resin containing 15% glass fiber and proprietary lubricant. Added features of this grade include: Wear Resistant, Healthcare.