LNP THERMOCOMP™ Compound - LF004E - SABIC's Specialty

Identification & Functionality

Chemical Family: Polyether Ether Ketone (PEEK)
Fillers Included: Glass Fiber
Polymer Name: Polyetheretherketone (PEEK)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Labeling Claims: No Added PFAS
Materials Features: Cost Effective,
Easy To Mold,
Good Moldability,
Good Processability,
High Modulus,
High Stiffness,
High Temperature Resistance,
No Added PFAS,
Very Good Heat Resistance

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics
Applications: Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays,
Industrial Automation
Electrical & Electronics — Parts & Components
Connectors,
Semiconductor Manufacturing,
Switches & Relays
Plastics & Elastomers End Uses: Appliances,
Cell Phones,
Commercial Appliance,
Computer Components,
Displays,
Electrical Components,
Electrical/Electronic Applications,
Semiconductor Applications,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹	124	MPa	ISO 527
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	147	MPa	ASTM D638
Tensile Stress (Yield) ¹¹	114	MPa	ISO 527
Tensile Stress (Yield) ¹¹	126	MPa	ASTM D638
Tensile Strain (Break, 5 mm/min) ¹¹	1.7	%	ISO 527
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.3	%	ASTM D638
Tensile Stress (Break) ¹¹	114	MPa	ISO 527
Tensile Stress (Break) ¹¹	126	MPa	ASTM D638
Tensile Modulus (at 1 mm/min) ¹¹	8500	MPa	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	8620	MPa	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	7630	MPa	ISO 527
Tensile Modulus (at 5 mm/min) ¹¹	8730	MPa	ASTM D638
Tensile Strain (Yield) ¹¹	2.2	%	ASTM D638
Tensile Strain (Yield) ¹¹	1.8	%	ISO 527
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	228	MPa	ASTM D790
Flexural Stress (Yield, at 2 mm/min) ¹¹	196	MPa	ISO 178
Tensile Strain (Break) ¹¹	2.2	%	ASTM D638
Tensile Strain (Break) ¹¹	1.8	%	ISO 527
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	8090	MPa	ASTM D790
Flexural Modulus (at 2 mm/min) ¹¹	7000	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	7720	MPa	ISO 178
Tensile Modulus (at 50 mm/min) ¹¹	7580	MPa	ASTM D638
Flexural Stress ¹¹	213	MPa	ASTM D790
Flexural Stress ¹¹	207	MPa	ISO 178
Flexural Stress ¹¹	222	MPa	ISO 178
Flexural Modulus ¹¹	7000	MPa	ISO 178
Flexural Modulus ¹¹	6890	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Density ¹¹	1.42	g/cm³	ASTM D792
Density ¹¹	1.42	g/cm³	ISO 1183
Density ¹¹	1.43	g/cm³	ASTM D792
Specific Gravity ¹¹	1.45	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.09	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.3 - 0.5	%	ASTM D955
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.44	%	ISO 294
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.71	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.5 - 0.7	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1.2	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.58	%	ISO 294
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.1	%	ISO 62

	Value	Units	Test Method / Conditions
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	min. 280	°C	ISO 75/Af
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	305	°C	ISO 75/Af
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	261	°C	ISO 75/Af
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	335	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	320	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	286	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.000028	1/°C	ASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹	0.000045	1/°C	ASTM D696
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	332	°C	ISO 75/Bf
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000033	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000342	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000045	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000045	1/°C	ISO 11359-2

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	25	kJ/m²	ISO 180/1U
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	30	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	4	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80104, at 23°C) ¹¹	6	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, at 23°C) ¹¹	505	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	42	J/m	ASTM D256
Multi-Axial Impact ¹¹	1	J	ISO 6603
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	6	J	ASTM D3763
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	8	J	ASTM D3763

Packaging & Availability

LNP™ THERMOCOMP™ Compound LF004E