LNP THERMOCOMP™ Compound - LF006E - SABIC's Specialty

Identification & Functionality

Chemical Family: Polyether Ether Ketone (PEEK)
Fillers Included: Glass Fiber
Polymer Name: Polyetheretherketone (PEEK)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Labeling Claims: No Added PFAS
Materials Features: Cost Effective,
Easy To Mold,
Good Moldability,
Good Processability,
High Modulus,
High Stiffness,
High Temperature Resistance,
No Added PFAS,
Very Good Heat Resistance

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics
Applications: Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays,
Industrial Automation
Electrical & Electronics — Parts & Components
Connectors,
Semiconductor Manufacturing,
Switches & Relays
Plastics & Elastomers End Uses: Appliances,
Cell Phones,
Commercial Appliance,
Computer Components,
Displays,
Electrical Components,
Electrical/Electronic Applications,
Semiconductor Applications,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Note: ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹	159	MPa	ISO 527
Tensile Stress (Break) ¹¹	187	MPa	ISO 527
Tensile Stress (Break) ¹¹	181	MPa	ASTM D638
Tensile Strain (Break, 5 mm/min) ¹¹	1.9	%	ISO 527
Tensile Strain (Break) ¹¹	2	%	ASTM D638
Tensile Strain (Break) ¹¹	2	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	11200	MPa	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	12900	MPa	ISO 527
Tensile Modulus (at 5 mm/min) ¹¹	13030	MPa	ASTM D638
Flexural Stress (Yield, at 2 mm/min) ¹¹	222	MPa	ISO 178
Flexural Stress ¹¹	262	MPa	ASTM D790
Flexural Stress ¹¹	278	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	9500	MPa	ISO 178
Flexural Modulus ¹¹	11030	MPa	ASTM D790
Flexural Modulus ¹¹	12500	MPa	ISO 178

	Value	Units	Test Method / Conditions
Density ¹¹	1.53	g/cm³	ISO 1183
Density ¹¹	1.53	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.08	%	ASTM D570

	Value	Units	Test Method / Conditions
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	min. 240	°C	ISO 75/Af
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	min. 280	°C	ISO 75/Af
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	min. 298	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2 mm, Unannealed) ¹¹	min. 298	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000198	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000205	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000036	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000362	1/°C	ISO 11359-2
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	min. 240	°C	ISO 75/Bf

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	40	kJ/m²	ISO 180/1U
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	58	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	11	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80104, at 23°C) ¹¹	9	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, at 23°C) ¹¹	913	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	117	J/m	ASTM D256
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	8	J	ASTM D3763

Packaging & Availability

LNP™ THERMOCOMP™ Compound LF006E